Site Map

Vonage

Last updated: 2009, October 24
Total pages: 154535

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 [29] 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310

    
/154529 pages
ftopic12642.html
Vonage Cable Modem -pc -WRT54GX | -laptop I'd try the RTP300 with
ftopic12858.html
Vonage Yes. Yes. This would also work. That is up you you. I bought a PAP2
ftopic11971.html
Vonage :-D :) :-D :) :clap: :imslow: Woo-Hoo (sorry I had to say that!) I spliced and
ftopic12834.html
Vonage If everything goes well, then the cordless phone is a practical solution to your
ftopic12826.html
Vonage yeah... it is possible that all of the jacks were not hooked up. I am connected
ftopic12758.html
Vonage I assume that you've connected the WAN port on the RTP300 to a LAN port on the MR812.
ftopic12745.html
Vonage That's great. Thanks for the feedback.
ftopic12327.html
ftopic12327-10.html
ftopic12327-20.html
ftopic12327-30.html
Vonage You're welcome. We're glad it all worked out.
ftopic12549.html
Vonage Even though you never had Verizon provide service, have you verified that your
ftopic12482.html
Vonage I agree with a-dhold, but you should keep in mind the re-sale value of your home.
ftopic12463.html
Vonage Cat 5 to telephone company White/Blue -> Green (Tip Line 1) Blue ->
ftopic12323.html
Vonage That's the thing, there is no screw terminal, just the white and blue wires. If
ftopic12372.html
Vonage It sounds like you have mixed wiring that has been crosswired to make certain jacks
ftopic12379.html
Vonage Hi I had Vonage for about 15 months and its been working great. About three
ftopic12326.html
Vonage Thanks. I switched the 2 routers and so far no problems. I know that I had tried
ftopic12329.html
Vonage Thanks for that link! That's what I need. That switch used in addition with the
ftopic11987.html
Vonage Very usefull info. You guys are great! Thanks again!
ftopic12235.html
Vonage I'm glad it worked out. My question was for Stephen. I wondered if I was interpreting
ftopic11681.html
Vonage I am looking to incorporate 5 5line centrex box such that I hopefully will be able
ftopic12072.html
ftopic12072-10.html
Vonage I still have not been able to get pics, but I went down and looked at it again. There
ftopic12109.html
Vonage From the "how not to install Vonage dept": http://tinman.livejournal.com/242021.html
ftopic11945.html
Vonage The Hawking QoS Device is the HBB1. The D-Link equivalent is the DI-102.
ftopic11983.html
Vonage FYI, my QOS upstream rate on the router is 512kbps. When im maxing my pipe...now
ftopic11944.html
Vonage It helps some. Those two access points are jacks for your two telephones, right?
ftopic11685.html
ftopic11685-10.html
Vonage another issue I found as well....my ISP (cablevision) will not restrict one IP
ftopic11970.html
Vonage nice. thanks for the update.
ftopic9353.html
ftopic9353-10.html
Vonage OK. I'm convinced that when Vonage pushed the 1.00.60 firmware to my WRTP54G adapter
ftopic11917.html
ftopic11917-10.html
Vonage it's my pleasure. that's why we are here.
ftopic11937.html
Vonage you have asked a loaded question with almost no information for us to answer it. It
ftopic11936.html
Vonage Do you have a wireless router in front of the RTP300? 2.4 GHz cordless phones and
ftopic11903.html
Vonage Whoever thought of using that USB crap to connect to a modem should be shot. Just
ftopic11908.html
Vonage I do not see why it would not work. It looks like the Stac6 is a multi line system with
ftopic11884.html
Vonage :-D Thank you that did it. I change the channel of one of my phones and it worked
ftopic11858.html
ftopic11858-10.html
Vonage will try this thanks
ftopic11740.html
ftopic11740-10.html
Vonage Call technical support. :-D
ftopic11811.html
Vonage B-Y = yellow black - I am working with the old-fashioned, 4-wire. Sounds like
ftopic11817.html
Vonage Right. As far as the line still being (semi) active, in some places the phone companies
ftopic11803.html
Vonage Yes thanks it was actually the firmware. I called vonage CS and they updated
ftopic11782.html
Vonage aren't the four bolt heads in the middle actually fuses? i've seen some setup's
ftopic11796.html
Vonage Just called vonage and of course no help
ftopic11787.html
ftopic11787-10.html
Vonage No problemo! If you have problems connecting the RTP, please let us know. Ciao.
ftopic11627.html
Vonage Did any of this help you?
ftopic11745.html
Vonage that's great. Welcome aboard the Vonage ride...
ftopic11684.html
Vonage OK...it was the Comcast wiring that was the culprit. I removed the blue and white
ftopic11091.html
ftopic11091-10.html
ftopic11091-20.html
Vonage Already looked at those actually. I wanted to be able to see who's at the front door
ftopic11650.html
Vonage No, they won't. You do not own the demarcation point in an apartment, and landlords
ftopic11365.html
Vonage That's great, but I'd still look at the firmware version. A LOT of things got fixed
ftopic11580.html
Vonage You got that right. Welcome aboard.
ftopic11582.html
Vonage Sorry for the double post.
ftopic11480.html
Vonage Thanks Dave! No, it was not from eBay. In fact as I was out of country I bought it at
ftopic11443.html
Vonage I would hook up the modem and the wireless in a room on the first floor where you would
ftopic11419.html
Vonage The phone adapters connect directly to the WRT. QOS enables them to have prioritized
ftopic11420.html
Vonage OK cool...I follow ya... This is a second line....so it would be yellow and
ftopic11378.html
Vonage Wow! Nice catch, Mundy.
ftopic11002.html
Vonage ok now that you have the newest firmware, you should be able to do the setting that
ftopic11381.html
Vonage I think we've all fallen for that one once. Welcome aboard.
ftopic11304.html
Vonage Yes, It works well the way it is with the server only plugged into the 300. I would
ftopic11343.html
Vonage my rt31p2 also has reversed polarity at its phone jack... i just made a cross over
ftopic11287.html
Vonage well, we're still having substantial problems. tried several different configurations
ftopic9733.html
ftopic9733-10.html
ftopic9733-20.html
ftopic9733-30.html
Vonage I also maintain POTS and Vonage, and manage with a 2-line cordless phone system.
ftopic11322.html
Vonage Yes, that's the way it should be. A slow flash means you have voicemail, and a faster
ftopic11316.html
Vonage I posted this eslewhere but now think it will fit better here. At the location
ftopic11314.html
Vonage Here is what I did. After you open the NID on the customer side, there is a TELCO
ftopic11240.html
Vonage Yeah, that would make more sense... I think I had two thoughts going through my
ftopic11299.html
Vonage Steve, thanks for asking. Naturally I haven't a clue (at the moment). I'll check
ftopic11270.html
Vonage Correct. That should do it. If you have a voltmeter, you can be extra sure
ftopic607.html
Vonage Sschmerge, welcome aboard, but you're replying to a thread that's been dead for
ftopic11151.html
ftopic11151-10.html
Vonage That's great. Enjoy the savings!
ftopic11148.html
Vonage You know what, I think you're absolutely correct. The switch would certainly
ftopic11141.html
Vonage Got it. Sounds like a good plan.
ftopic11150.html
Vonage I agree with Steve48 a blinking phone light either phone 1 or 2 means Phone is in
ftopic10199.html
Vonage ON the topic the answer is, NO YOU CAN'T. VONAGE will tell you that you can, but after
ftopic11120.html
Vonage just as a suggestion, I would make sure that you have at least one cat5e going to
ftopic9389.html
Vonage The configuration I have is follows cable modem <<hard wired from
ftopic11035.html
ftopic11035-10.html
Vonage So after all that, do you have all the information that you need, and are you ready
ftopic11047.html
Vonage if you connect your computer directly to the Vonage router and get into its web
ftopic11027.html
Vonage I think what you did was change the connection point from the modem now to your laptop.
ftopic10967.html
Vonage I found the issue. The line I was connecting was a fax line in the Study, which only
ftopic10901.html
Vonage Thanks Steve...
ftopic10834.html
Vonage Two words: curly fries no pun... pure goodness.... Unplug the phone
ftopic10787.html
Vonage [font=Verdana:6afe00826d]Hello, everyone! I am so excited to be here! The response
ftopic10726.html
Vonage imagine, if you get the 384 kbps dsl, you'll quickly run out of upload bandwidth
ftopic10749.html
Vonage Yes... If it is an expandable base unit, i.e you can have multiple phones,
ftopic10699.html
Vonage It did not work but redoing it, it does now. Thanks.
ftopic10547.html
ftopic10547-10.html
Vonage OK, we look forward to hearing from you. One of the things I forgot to mention. When
ftopic10634.html
Vonage Can anyone give me some pointers on how I can integrate the vonage service with
ftopic10431.html
Vonage I just did a multi line system with roll over between 3 of the 4 numbers on an existing
ftopic10587.html
Vonage You could also say to heck with house wiring, and get an expandable set of cordless
ftopic10553.html
Vonage That is known as a Punch Down Block. It is also refereed to as a Dmarc, which is short
ftopic10497.html
Vonage Thanks again for your help Steve, Ok, here is an update 5 of the jacks are
ftopic10447.html
ftopic10447-10.html
Vonage I have a Panasonic 2.4 GHz phone model # KX-TG2312. I purchased it at Best Buy about
ftopic10496.html
Vonage It sounds like you're doing the right things to track your problems down. I
ftopic10466.html
Vonage It should work fine. Many people use POTS on one line and Vonage on another with
ftopic10392.html
Vonage posting a picture will help. My house was built in 2002 and it has a phone plug
ftopic10364.html
Vonage Correct- just be sure you get the right side!
ftopic10131.html
Vonage Benmac, I do this now, but it's not all over the house. My 110 block in the attic limits
ftopic8044.html
Vonage Looking at the specs for the Avaya IP Office, it's a private VoIP Small business
ftopic10205.html
Vonage Try plugging the Vonage adapter WAN port into the modem. Then plug the WRT WAN port
ftopic10181.html
Vonage You're correct Steve48. Perhaps Dan, would you change the title to strictly "Hard
ftopic10201.html
Vonage Ok cool, thanks for the help everyone. I am using a 3rd party firmware on my Linksys
ftopic10180.html
Vonage You would do better to post this to the VoIP forum (or have the forum administrator
ftopic10079.html
Vonage Through another forum I found some answers to my questions, and I thought I'd share
ftopic10017.html
ftopic10017-10.html
ftopic10017-20.html
Vonage Hooray! Congrats! Let the money keep rolling in...
ftopic10039.html
Vonage Haha thanks, I just winged it. It was my first time playing with telephone wires
ftopic9995.html
Vonage Even though through the web admin under: Status->Voice it said it had
ftopic10003.html
Vonage Actually, I don't have experience with that equipment, but I see no reason why
ftopic9784.html
Vonage OK, I've checked out the C-0432 and I see that it's a punch-down distribution box
ftopic9880.html
ftopic9880-10.html
Vonage Sweet Distro! I would say first thing is to check the wiring going into the
ftopic9881.html
Take_a_look_at_http_www_vonage_forum_com_ftopic8941_html_The_length_of-post-57230.html
ftopic9801.html
Vonage Yea! We found the problem. There was some kind of thing hooked up in the Garage all
ftopic9832.html
ftopic9832-10.html
Vonage If I understand what you are asking, you just use the blue pair for phone. However,
ftopic9844.html
Vonage Thanks... I'll try that.
ftopic9728.html
Vonage tworouters, I appreciate your post. However, I would recommend you start a new
ftopic9679.html
Vonage My furthur research indicates a PBX is needed. Does anyone have a recommendation
ftopic9758.html
Vonage This website has all of the pinout info you need, with color coding for phone as
ftopic5864.html
ftopic5864-10.html
Vonage Sounds like you guys have it under control exept for one thing... NEVER, and
ftopic9563.html
Vonage Glad to hear that everything is working for you! Hope you enjoy using Vonage!
ftopic9662.html
Vonage You've already gotten some good advice. I'll add that one of the first things you
ftopic9309.html
Vonage Hi, Why worry about wiring telephones...The simple solution is to go WIRELESS.
ftopic9625.html
Vonage acid, there has been recent questions about using a wireless bridge to connect
ftopic9631.html
Vonage mrq, the dual line phone jacks accept the same plug as a single line plug (rj11).
ftopic9354.html
Vonage I have the same Panasonic phone and I dont have that problem I have 3 phones connected
ftopic9601.html
Vonage An open connection has 0 ohms across it. A wire connected has infinite ohms. OOPS
ftopic9597.html
Vonage I live in an almost new high-rise. Fully wired with CAT-5e cable. Love that I've
ftopic9582.html
Vonage DMut, you see the labeling on the left - it notes "R" and "T" for 1,2,3, and 4. 1-4
ftopic9545.html
Vonage Prior to Vonage, i had this device receiving calls and it sends faxes to the fax
ftopic9422.html
Vonage I have cable modem plugged into linksys RT31P2 and from that router to BEFW11s4
ftopic9443.html
Vonage okay I managed to solve my problem after about 2.5 hours talking to five different
ftopic9407.html
Vonage Freddy, You only need to punch down "Tip & Ring" from the Vonage adapter
ftopic1961.html
ftopic1961-10.html
ftopic1961-20.html
Vonage Fromw hat I've read on this forum and elsewhere, some folks think the RTP300 represents
ftopic9258.html
Vonage I cannot speak for CS but I have read in earlier posts that people have had these
ftopic9330.html
Vonage Lois, To convert a home from a 2 line system to a 1 line system is to go to the phone
ftopic9349.html
Vonage SB, adaptable as in how??? The VTech 8100 is a VoIP router with a wireless phone
ftopic9316.html
Vonage you might also look in the neighboorhood for the local phone guy and approach him
ftopic9345.html
Vonage The modular plug attached to the green connector in the NIU connects your house
ftopic7692.html
ftopic7692-10.html
Vonage
ftopic9314.html
Vonage
ftopic9311.html
Vonage I think you should post a diagram of what you're actually doing, because it isn't
ftopic8588.html
Vonage Sartan, have you tried dialing a number before it starts the sequence of fast
ftopic9048.html
Vonage HI there, I work at Talkswitch so I can help answer your question. You
ftopic9073.html
Vonage hg0528, if it says it can be ported, theoretically it can although I have heard
ftopic9094.html
ftopic9094-10.html
Vonage This is only a guess but is it possible that the jack or jacks are on one line and the
ftopic8742.html
Vonage Michael, There is a very easy solution to your problem. All you need to do is
ftopic9218.html
Vonage i though of an idea in which i cut the modem usb cable into two usb heads. one connected
ftopic9192.html
Vonage kirit, i'll take a stab, but some details on all the steps and your configuration
ftopic8620.html
ftopic8620-10.html
Vonage We can't tell you if they correspond to a different jack in the house. That would
ftopic9183.html
Vonage Well, if you're thinking running GigE, then yeah, a patch panel and Cat6 would
ftopic9176.html
Vonage Well, Mr. H323 expert ;-)... It's all in the voltage. The more devices on the
ftopic9147.html
Vonage acf, I also have recently built a new home. The builder will supply 1 or 2 lines going
ftopic9142.html
Vonage acf, you're probably only seeing the surface of how your home telephone system
ftopic4020.html
Vonage :roll: Holy sh, woops, I mean crow! This is all totally out of my (and my dear husband,
ftopic8950.html
Vonage That should work great. During the number transfer process I had pots running
ftopic8270.html
Vonage guys i have two lines and when i connect the other telephone at port 2 it not works
ftopic9111.html
Vonage Having reviewed this product on the OnQ website I am uncertain why you would need
ftopic9085.html
Vonage 2 options: 1. Buy a wireless jack 2. Buy a phone with base unit.
ftopic8697.html
ftopic8697-10.html
Vonage Same problem here! I actually tried dialing my cell before getting the fast busy
ftopic1363.html
Vonage One more thing, I just read someone else's post about voltage. Could it be possible
ftopic9020.html
Vonage Ok I'll give them a call and see what they say. Thanx.
ftopic2700.html
ftopic2700-10.html
Vonage I found a nice pbx site and its a nice unit liked the first one so good i bought a second
ftopic8182.html
Vonage All of the devices that work with Vonage's primary service are locked to Vonage.
ftopic8917.html
Vonage jbecker, you didn't say which phone system you have... What you get from your
ftopic8839.html
Vonage resolved this last night. one of the cat5 runs was shorting out the rest of the block.
ftopic8876.html
Vonage Hi, I have a small office with 16 phone drops only (6) in use at this time with 4 vonage
ftopic8832.html
Vonage Thanks for the help Michael.
ftopic8834.html
Vonage thank you Michael. I wasn't planning to plug it into the wall. I was going to
ftopic8224.html
Vonage Well at least your not hearing loud spanish music in the background :lol:
ftopic8674.html
Vonage I would think that Vonage features and a Lucent Partner ACS are a very good pairing. The
ftopic8658.html
Vonage By the way what phone adapter do you have
ftopic8667.html
Vonage I would try using two conductor line cords to connect your two line phone. It
ftopic8631.html
Vonage Thanks for the reply. You guys were speaking French to me...but I assume that everything
ftopic8354.html
Vonage The easy answer is to try Digi-Key a well known and reputable online retailer.
ftopic8575.html
Vonage There are many variables and I am assuming you have cable internet and the office
ftopic8445.html
Vonage You probably already know this, but just in case (or if this could help anyone else)
ftopic8073.html
Vonage I got the same problem as budershank did - no dial tone at all after pluging the TA
ftopic8363.html
Vonage Thanks for the respone... see my comments below :)
ftopic8322.html
Vonage hopefully this link will help if you have not already seen it. http://www.vonage-forum.com/setup.
ftopic8244.html
Vonage I have a antiqe (Several actually) phone (model 302 or the I Love Lucy phone) and
ftopic8347.html
Vonage thanks! I will give that a try!!
ftopic8048.html
Vonage I have an AT&T 2.4 GHz Telephone E2715B it has caller ID and voicemail indicator
ftopic7981.html
Vonage A wireless phone jack might do the trick if wireless networking worked too :)
ftopic8316.html
Vonage I have the RT31P2 and it hiss's horribly even when not connected to the internet. Forum
ftopic8306.html
Vonage I just spent over 2 hours on the phone repeating myself and trying to decipher what
ftopic8282.html
Vonage Thank you very much for the link, scerruti. I'm reading it now.
ftopic8274.html
Vonage I finally figured out how to fix my RFI problems... background: After disconnecting
ftopic8185.html
Vonage 1) Is there a way around registering that second mac ( linksys). NO. Only one
ftopic8220.html
Vonage Please describe how you currently have it configured and what is happening in
ftopic8251.html
Vonage Hello, I am wondering if it is possible to hook the Linksys vonage adaptor
ftopic8245.html
Vonage Ok after doing research on my hardwiring, I went back to the beginning. When the
ftopic8206.html
Vonage Photojim, usually the "wife" factor has a role to play in that one.
ftopic8233.html
Vonage I have a problem with the incoming ring duration on my phones through my Linksys
ftopic7322.html
Vonage Low humm can be an indication of crossed pairs, or a shared ground. Make sure if
ftopic7864.html
Vonage You can run your phone on CAT 5 Cable. The blue & blue/white where actually
ftopic8173.html
ftopic8173-10.html
Vonage That should have been "only need to be prioritized to guarantee quality on heavily
ftopic8092.html
Vonage From what I can see, there is no option for file/print sharing on a router. It's
ftopic5303.html
Vonage Please feel free to call us as we can answer any questions. Also BizFon has a NEW
ftopic8126.html
Vonage As I understand it, if I want two Vonage numbers to be charged to two different credit
ftopic8099.html
Vonage Short and sweet. T-1 -> Hardware Firewall -> Switch -> Computers How
ftopic7552.html
Vonage Now I have a question regard the Partner II system since I see some people in this
ftopic7951.html
Vonage The phone connector on a US Linksys is a standard US RJ11 connector and you will
ftopic7815.html
ftopic7815-10.html
Vonage Thanks to everyone who helped! I should be getting it soon and am ready to start
ftopic7927.html
Vonage Maybe I should have looked at that first. Thanks.
ftopic7890.html
Vonage This has a simple Network Setup Guide
ftopic7865.html
Vonage Yes, and they very kindly allowed us to use that content in our Home Wiring and Installation
ftopic7800.html
Vonage Thanks, Stephen! That's what I thought. Yes, I can plug a phone into that jack and
ftopic7766.html
Vonage Unplug your telco from the outside NIC which is located at the point where you telco
ftopic7730.html
Vonage seems I spoke too soon... I found the problem, the wiring in one of the bedrooms
ftopic7706.html
Yea_ive_done_it_http_www_vonage_forum_com_ftopic7692_html_If-post-43196.html
ftopic7701.html
Vonage Thank you very much, I really appreciate it. (Excuse the n00bishness.) :lol:
ftopic7622.html
Vonage Kevin, Yes.. check out the Epygi Quadro 4X. You can hang your ATA off of the POTS
ftopic7581.html
Vonage My best response is to go to this page Step By Step Home Wiring Setup http://www.vonage.com/he
ftopic7450.html
Vonage I spoke to Vonage again last night and was told to go ahead and disconnect the wiring
ftopic7434.html
Vonage Off the top of my head, I'd say you have a few options without running extra cables: -put
ftopic7168.html
ftopic7168-10.html
ftopic7168-20.html
Vonage Thanks for the lead! I'll be checking into some of the information posted on the
ftopic7402.html
Vonage Thanks for the help, I found the problem this evening. It turns out that I was disconnecting
ftopic4914.html
ftopic4914-10.html
Vonage The parent that you love?? :P Yes, I did exactly that since I live in a high
ftopic7312.html
Vonage For detailed instructions see the Michigan Telephone Site for instructions
ftopic7319.html
Vonage I have tried rotary dialling... At least with the Linksys box, it's a no-go
ftopic6488.html
ftopic6488-10.html
Vonage Have you tried my suggested 20Hz, 90V, Trapezoidal ring? Considering the
ftopic7072.html
Vonage You are probably right, the NIB is more likely to be installed by your local Bell
ftopic7132.html
Vonage In most cases, you just have to go outside and disconnect your house from the phone
ftopic7122.html
ftopic7122-10.html
Vonage So the phone cable comes out of the ground and just ends? Or did the electrician
ftopic7099.html
Vonage By "8 phone lines" I assume you mean 8 physical phones wired to the block? There
ftopic7120.html
Vonage The normal colors would be red/green for line 1, and black/yellow for line 2. I
ftopic7103.html
Vonage um, yeah, everybody does that already...
ftopic7081.html
Vonage Thanks very much for the help!
ftopic6896.html
ftopic6896-10.html
Vonage I'll give the phone cos around here credit for minimal outages. Even when hurricanes
ftopic7022.html
Donna_819_I_m_sorry_to_hear_that_you_have_yet_to_get_your_Vonage_to_work_properly-post-39128.html
ftopic6899.html
ftopic6899-10.html
Vonage I'll also add my recommendation for the Uniden TRU88xx series... I originally
ftopic6932.html
Vonage Sounds to me like there is another device connected to your house wiring which
ftopic6914.html
Vonage Give 'em a shout...according to this poster, they'll adjust it: http://www.vonage-forum.com/ftopi


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 [29] 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310