Site Map

Vonage

Last updated: 2009, October 24
Total pages: 154535

/154529 pages

Vonage same problem here :evil:

Vonage Hi! I'm having the same issues. My fax (Brother Intellifax 1270) was working fine

Vonage Same problem here they say to get a dsl filter but what i don't understand is it worked

Vonage we are having the same problem...vonage has advised us to lower the baud rate on

Vonage Hey everyone, I am having the same problems with my hp 3100. I can recieve fine but

Vonage Seriouly hurting business. Hoping someone at Vonnage will see all the posts,

You_might_want_to_look_here_http_www_vonage_forum_com_ftopic1779_html-post-8708.html

Vonage I had a HP6100 so I thought by purchasing a 7130, that would be better. It worse.

Vonage I have my internet set up through a modem, WRT54GS Linksys router, and the VT2142-VD

Vonage I think you want to be able to access RDP on your PC from outside of your network.

Vonage I currently have a CPI security system and my alarm wont work because my wires are

Vonage The problem with a security system that uses a telephone line to communicate with

Vonage Hi All, I tried and failed to get my fax modem working. That's OK, I decided

Vonage I've had Efax since last December. It's great if you have a lot more incoming than

Vonage Why don't you try TrustFax? Its easy, very reliable online fax. You get

Vonage Our office uses 101Fax for faxing online. It really does a great job even if we have

Vonage If it's internet fax, you might want to check out SmartFax. You can give them a try

Vonage Popfax.com is a company that provides Internet Fax service for 3 years on the World

Vonage Internet Fax services are great, but eFax is among the most expensive. Their eFax

Vonage Try Popfax.com is only 3,99euro/month, Try it for FREE, no credit card info required.

Vonage hi guys I agree with Andrei H, it's easy with them and very cheaply, you can trust

Vonage I'd like to share my personal experience - eFax has bad customer support - in fact

Vonage Since the RJ-31 jack in my panel now plugs in to the adapter, I assume I need to wire

Vonage Basically, leave the alarm system set up as it was before. If you have already made

Vonage I understand your instructions but it won't help me. My Vonage phones work just

Vonage Ok, What are you plugging the vonage adapter into and what are you plugging the

Vonage Let me try to explain. I have a single phone connection in the house. I removed the

Vonage OK, let's review the wiring as it was with the land line. What's supposed to happen

Vonage Hi Steve: You've accurately described the wiring as it originally was. When I

Vonage Something just occurred to me. Why do/should I care about the phone line and Vonage

Vonage Exactly. From one of your prior posts, the thing that struck me was that you were

Vonage I believe the wiring is as it should be inside the alarm. I replaced the RJ31 connector

Vonage Can I buy a coupler and use one line for my phone and for my fax? I'm only going to be

Vonage I've set my Vonage service up hardwired to the phone wiring in the house and hooked

Vonage Hi sjbdeebo2, Ya , it's possible in my office when our phone line is de

Vonage Cant fax !! at all!! it works sometimes ,, never consistent,, i then call there

Vonage And yet I fax with almost 100% success and have for years with Vonage, from both

Vonage Rather than a rant, why not give us some facts to work with. What make and model fax

Vonage I have two vonage lines that I fax on, one is the 250 minute - outgoing fax line and

Vonage My fax is a POTS line, distintive ring, but when I need to send a LD fax, I simply switch

Vonage I nver had problems faxing with Vonage for over a year.. of course the problem occured

Vonage I never have a problem faxing with my HP 7280 AIO Printer. I did set it to a slower

Vonage I have intermittent faxing problems, too. Usually I can get one page faxed successfully,

Vonage I've been with Vonage about a year now...perhaps I won't be much longer if something

Vonage What is your internet service?? Cable? DSL? I really don't know the technical

Vonage I am so ridiculously frustrated with this fax line... I run a trucking brokerage

Vonage I need something kind of like efax but mostly to receive faxes. I could care

Vonage Well, why not eFax? I used it in the past and loved it. Does it not work well for

Vonage I need something kind of like efax but mostly to receive faxes. I could care

Vonage Try doing a google search for "virtual fax". This is the generic term for eFax replacement

Vonage Well, why not eFax? I used it in the past and loved it. Does it not work well for

Vonage Got there in the end :- Welcome to chat. The session has been accepted. {Craig

Vonage www.faxdigits.com

Vonage Check out SmartFax. Their price is quite competitive. You can even try their service

Vonage the basic setup of any alarm panels is telco -> alarm panel -> rest of

Vonage I just moved to a new house and the alarm panel (I believe it's a Napco) doesn't have

Vonage Can you snap a few pictures and post them up here? It will help to understand what

Vonage Can do. I will upload those this evening.

Vonage Hello everyone... last night my friend came over and wired it... he's very telephone

Vonage :-D New Vonage customer and a new forum member... I recently switched

Vonage There should be a phone block next to your alarm panel. If you take the cover off

Vonage Any of you gurus ???

Vonage He's telling you to do what you read about. That would be the modification at a NIC.

Vonage Man, I must learn to read the whole post as I basically stopped after his quote

Vonage Thanks! !!! The Interface box outside has CAT3 (5?) wires with 4 sets of twisted

Vonage I bought Vonage about 1 week ago, I tried connecting TIVO, it doesn't dial in. Is

Vonage I recommend you do a search on PPP and serial cable in the forum and go that route.

Vonage Is it a standalone Tivo or DirecTivo? I have been successful in getting my DirecTivo

Vonage I have had very good luck using a DSL Filter. Also, if you can get the phone numbers

Vonage Any chance that you have that number handy? I tried to dial in and get local numbers

Vonage I am beginning to wonder if the ATA has anything to do with this. I just posted somewhere

Vonage I just had success (1 test call, 2 forced daily calls) using this method: http://www.tivocommunity.

Vonage I setup my TiVo to update via a PPP over serial connection this weekend and it was

Vonage Okay, so I have read through these forums for quite a while, but I can't put together

Vonage You are correct about not being able to disconnect at the NID. In my most basic description,

Vonage Okay .... so the NIU has only one set of wires connected ... the blue and blue/white.

Vonage I suggest that you disconnect the telco line from the blue/white pair and connect

Vonage Where exactly am I supposed to disconnect the telco line? Sorry, I am obviously

Vonage I suggest that you disconnect the telco line from the blue/white pair and connect

Vonage Okay, that sounds simple enough. So, in summary, all I need to do is: 1)

Vonage Also, could I essentially do this the other way around? In other words, could

Vonage So, I did as instructed, but I could not get a DSL connection on the second pair.

Vonage I think you are saying that you disconnected the blue/white pair from the AT&T

Vonage I'm interesting in using a software based virtual modem to make a dialup connection

Vonage I have no idea what you are asking. Modem's modulate/demodulate. Besides

Vonage Here is what i did to make it work....im sure this might have been discussed before

Vonage Was this with your main phone number in the house or from the secondary number which

Vonage My friend, Thanks for that tid bit....was wondering why all my Tivo(s) dropped

Vonage This is for my only line that i have, i dont have a FAX line..just a primary phone

Vonage Just curious if you have looked at your phone logs lately? For a while now, Tivo

Vonage i look at my phone log and its one call a day...so far so good...

Vonage After many hours of trying everybody elses suggestions yours actually worked

Vonage I just connected mine up, put *99 as prefix and it works fine

Vonage I'd like to know how everybody is doing this? mine wont connect., i get "failed.

Vonage Try it a few times....I often don't get through the first try, but eventually get

Vonage Greetings! First off I will say I have read a lot of posts here and have found

Vonage If your Vonage device is a VDV21VD, both lines appear on the phone 1 jack. To avoid

Vonage I was starting to suspect the same thing, thanks for confirming my thoughts!

Vonage that did the trick! I called Guardian and the test ran successfully and the FC status

Vonage How do I FAX from an HP J6450 All-in-One Printer/FAX that is connected to a PC (Windows

Vonage You need a dedicated fax line.

Vonage Why?

Vonage Ok then. Try hooking your fax machine up to your VoIP line and have someone fax you.

Vonage Do it all the time and it works, so ..... Without knowing how much the op really

Vonage We have problem with some people that use vonage to send and receive faxes, and

Vonage A little confused by what you are asking since, there is no difference in the traffic.

ftopic23700.html

Vonage I followed your instructions by the letter and lo and behold got it working! You

ftopic23612.html

Vonage Never tried it, sorry folks. I probably should if I'm ever around home again (this

ftopic23677.html

Vonage whatumean is correct. never buy anything without a vonage logo if you intend to

ftopic23655.html

Vonage either wait for dlink to post a new firmware or driver or go back to sp2 for xp. i'm

ftopic23504.html

Vonage There is an easier way to do it. You don't have to call comcast. Just follow these

ftopic23640.html

Vonage What he said

ftopic23507.html

Vonage I'd posted the question on the Vonage forum but I am wondering if the Hard Wiring

ftopic23482.html

Vonage Hello,Thanks so much for your reply,I got this router new an yes it has worked up

ftopic23495.html

Vonage I want to disconnect the phone lines at the NID box to use Vonage on all my phone jacks.

ftopic21975.html

Vonage They should have QoR ratings... (Quality of Router) LOL I have no doubt that

ftopic23454.html

Vonage :roll:

ftopic23106.html

Vonage Hi, You can determine if your phone service would have good quality or bad

ftopic23490.html

Vonage Don't worry about the plastic connectors. Cut the wire as close as possible to

ftopic23317.html

Vonage i know this is old but i thought it was funny.. they are NOT fuses. They are CAT5/CAT5E

ftopic23427.html

Vonage I have AT&T DSL. I have it connected to an Airport Express. I have in another

ftopic3540.html

Vonage Get a ring booster model RG-10A from Viking Electronics. You plug it in between

ftopic23378.html

Vonage Thx Dave, you've got me on the right track. This makes a lot of sense. All my

ftopic23350.html

Vonage Thank you so much, Mr. Levenson. I'll try to heed your suggestions...or break

ftopic23329.html

Vonage What kind of negative feedback do you receive? I have VTech wireless phones and

ftopic23251.html

Vonage Well what you want is to keep your existing set up because you want the internet

ftopic23254.html

Vonage This problem has been fixed. TW had given me another bad modem. Gotta love it!!

ftopic23253.html

Vonage The feature you call rollover is usually called hunting. You can administer hunting

ftopic14283.html

Vonage You can try this one this will help you, - Predictive Dialers " There

ftopic23172.html

Vonage Sorry I wasn't clear. The wires that come in from outside should remain connected

ftopic23156.html

Vonage I got the Vonage box hoop up with the router (192.168.1.1) and I want to hoop

ftopic23122.html

Vonage Aside from this being posted in the wrong forum I think you may be a bit confused

ftopic22268.html

Vonage Single pair fix doesn't work for me. I have a 3 homerun single pair system with only

ftopic23074.html

Vonage I have a rj45 female connector like this Does anyone know how to wire the

ftopic18942.html

ftopic18942-10.html

Vonage I gather that the Vonage device still flashes when you plug it into the wall and

ftopic23041.html

Vonage OK. Let us know how it works out.

ftopic23001.html

Vonage Hello all. I did some searching for this and didn't find anything appropriate,

ftopic22422.html

Vonage I have stubbornly tried to place my wireless router ahead of the VT2442 for about

ftopic22923.html

Vonage Agreed. And even if the old outside line has no power on it, it must still be disconnected

ftopic22851.html

Vonage You might want to consider a slow phase-in, retaining one or two landlines until

ftopic22849.html

Vonage Hi ALL how to connect vonage with a laptop using GPRS modem for internet connection thanks

ftopic22821.html

Vonage Two pronged is OK. Three prongs are to protect the user, but polarized plugs are

ftopic22738.html

Vonage We'll be here.

ftopic22785.html

Vonage In your case what you will need to do itŽs a home wiring. If you go to the Vonage official

ftopic7910.html

Vonage I concur with Steve that if your phone quality is good, I wouldn't mess with it. Some

ftopic22744.html

Vonage That's great. I'm surprised that it worked to start with, but all's well that ends

ftopic22284.html

Vonage So does it work?

ftopic2015.html

Vonage This is how I used my existing POTS (Blueyonder/Virgin) house wiring/extension

ftopic22527.html

Vonage I just decided to go from the rt31p2 to a lan port of the wrt54g. The WRT54G is v8,

ftopic22538.html

Vonage ludwing, rather than add additional wiring (which would be easy and most effective),

ftopic21574.html

Vonage josephfe's suggestion might be the best for now since this is temp housing. I

ftopic22646.html

Vonage this subforum is really not the best place for your question. go to the main forum

ftopic3828.html

Vonage Locally we have Bellsouth telco NIDs that are tan or green 9inch square tube that

ftopic22518.html

Vonage Does anyone know a cheap and reliable REN amplifier available from a US vendor?

ftopic22486.html

Vonage As long as there isn't connection in that box to wires going into the ground and

ftopic22446.html

Vonage Thanks, but I don't feel comfortable enough to try a set-up other than what I had...

ftopic22434.html

Vonage thanks for responding, someone else has answered my question in another forum

ftopic22348.html

Vonage How many LAN ports does the integrated modem/router have? Can one be dedicated

ftopic22394.html

Vonage Hi, The RTP300 generally assigns ports as follows: DHCP Address Range:

ftopic22347.html

Vonage I've seen a problem where no phones would ring, but not one where just one wouldn't.

ftopic22353.html

Vonage They can still use Vonage. They will not be able to use the same wire pair that the

ftopic22367.html

Vonage Hi I have a home network set up as: Cable Internet -> Vonage VT-2142 VD ->

ftopic22340.html

Vonage Ok! Good tip on the wireless. thanx :)

ftopic22303.html

Vonage Most homes are wired for two lines. What you need to do is put the DSL on one line and

ftopic22290.html

Vonage Here's a solution for people who may have lost internet connectivity with VT1005

ftopic21832.html

Vonage I assume that what you're trying to do is use your house wiring for both phones.

ftopic22251.html

Vonage I am trying to use pre-wiring in my home, and therefore trying to use two routers

ftopic11517.html

Vonage i work as a contractor and install voip this is very common. most apartments are

ftopic22225.html

Vonage You shouldn't bypass the NIU. I assume that you're using the house wiring for your

ftopic5641.html

ftopic5641-10.html

Vonage cicero, welcome to the forum. In the case of an high rise, you can't unless

ftopic21495.html

Vonage If you plug a phone into the out port on the TH48 and get dial tone then purchase a

ftopic22066.html

Vonage Try using a cheap cord that has only 2 pins in it (the center 2) rather than all 4 to

ftopic22009.html

Vonage Thanks Steve48

ftopic21984.html

Vonage Welcome aboard. This is the hard wiring forum. You'll get better help with this

ftopic13810.html

Vonage That's funny because I had my Allworx 6x working just fine. Though I was only using

ftopic21915.html

Vonage That's certainly one solution. And it may be your only solution, since some alarms

ftopic3374.html

ftopic3374-10.html

Vonage I just don't get it, I'm doing the exact same thing you are doing but I get no dial

ftopic21868.html

Vonage Glad you got it working.

ftopic21856.html

Vonage Look at option 3 here: http://vonage.nmhoy.net/tworouters.html

ftopic21847.html

Vonage Start by reading the sticky message at the top of this forum on home wiring. There's

ftopic21803.html

Vonage Your VoIP test looks fine. That's not surprising, since your phone service seems

ftopic21808.html

Vonage You've posted this in the hard wiring forum. You'll get a better response if you

ftopic21712.html

Vonage Thanks for all the replies. It is currently still working right now, but once it

ftopic21754.html

Vonage thanks I'll switch forums, to answer your question tho, I just got the phone where

ftopic21728.html

Vonage The VT2442 has known firmware issues with the phone lights. If everything is working

ftopic21717.html

Vonage I can't speak for them, but I suspect that some of the used equipment is stolen and

ftopic14429.html

Vonage I managed to get some friends (via irc chat) to verify successful apache serving

ftopic21668.html

Vonage I thought you had, but your first post wasn't completely clear to me on that point.

ftopic21517.html

Vonage I'm puzzled why the tivo unit can override your phone conversations. I'd make

ftopic21460.html

Vonage I could only venture a guess that you damaged an independent segment of the switch

ftopic21321.html

Vonage Just a thought. Wouldn't it be possible to use the computers that are in the rooms

ftopic21598.html

Vonage what do i do to stop the power light from blinking?

ftopic20878.html

Vonage Hello Photman, I have the same netgear router and it does work with the vonage motoral

ftopic21412.html

Vonage The Merlin 820 system is great for a large home/small office system. I run my office

ftopic21455.html

Vonage Welcome aboard. You'll get a better response to this if you post it in the VoIP forum.

ftopic20599.html

Vonage Clear the caller id log It's a bug in the phone's firmware that they never fixed,

ftopic15145.html

Vonage Hi- I reconfigued my routers (WRT54G and Vonage RT31p2) after reading this

ftopic20616.html

Vonage No, a 5.8 GHz phone shouldn't cause the problem. See you over in the other forum.

ftopic21315.html

Vonage I don't know why you need to change the subnet mask, but you will probably get a better

ftopic21307.html

Vonage I was wondering if anyone have used any type of message-on-hold feature and hadware

ftopic10370.html

ftopic10370-10.html

ftopic10370-20.html

Vonage Hi BillyJoe, Your situation is a bit different than what the original poster

ftopic21235.html

Vonage Just a guess, could he have a bad DSL filter?

ftopic21218.html

Vonage Kathleen, I was hesitant to respond since I don't know anything about the OnQ box

ftopic21136.html

Vonage Yes, outside landlines should always be disconnected, even if it's believed

ftopic11218.html

Vonage Can I connect my linksys router directly to my pbx system or do i need a filter for

ftopic21065.html

Vonage You may be right, but let's troubleshoot methodically. If I've got it right, it

ftopic21027.html

Vonage I finally got it working. I went outside and looked at my telephone jack where I

ftopic21028.html

Vonage It shouldn't be. I'd call the business office and tell them what's been done to

ftopic21012.html

Vonage Take a look at this link and look at option 3. Also turn off the wireless function

ftopic21017.html

Vonage I am researching problems associated with the San Diego, Calif. area wildfires

ftopic21002.html

Vonage The first cable I used to connect my Vonage adapter to the wall was bad. (I Think)

ftopic20998.html

Vonage Posted in the wrong place

ftopic20985.html

Vonage Basically you can use any ordinary phone that you please. The one thing to avoid

ftopic20983.html

Vonage You've posted this in the home wiring forum. You'll get a better response if you

ftopic11123.html

Vonage Do you still use yoru Starcom wifi phone with Vonage? Do you know why Vonage no longer

ftopic20897.html

Vonage This link may help: http://yoda.uvi.edu/InfoTech/rj45.htm . The normal

ftopic20854.html

Vonage I think the answer is no, because the Linksys is not set up to do that. However, you'd

ftopic20843.html

Vonage Actually, you can get Vonage devices that handle up to 2 phone lines per device,

ftopic20819.html

Vonage Hi to all, I have a Siemens Gigaset 2420 and have lost the pin number. Does anyone

ftopic20733.html

Vonage thanks Steve, A couple of days ago I ended up cutting the blue/white wires

ftopic20734.html

Vonage It sounds as if they've bipassed the NID and put their own box on the wall. When you

ftopic20596.html

Vonage Ok - late replly here. But the best solution for an ATA is to be first link in the chain,

ftopic20679.html

Vonage Getting a busy signal means you have a short somewhere in the wiring. As you have

ftopic20706.html

Vonage Ok, I went back and re-hard wired, and the phone jacks are working now. I'm wondering

ftopic6617.html

ftopic6617-10.html

Vonage Welcome aboard. You've posted to a thread that's been dead for over a year. You'll

ftopic12929.html

Vonage I'm getting the same problem here! I restart my device and loose all my settings

ftopic20618.html

Vonage Hello Vonage is working well with my 3 cordless phones but I would like to use

ftopic19006.html

Vonage Hi, That is exactly what i wanted to do with my new Moto vt2542. But u can't see

ftopic20584.html

Vonage I would recommend mounting the *outdoor* junction box a little above where the

ftopic20593.html

Vonage You can chain it off of another jack if you want. It doesn't necessarily have to

ftopic20546.html

Vonage How did you hook the Vonage box into the house wiring? Most people do it by simply

ftopic20556.html

Vonage Certainly. It's standard to use the blue/blue-white pair for line 1

ftopic20466.html

Vonage Quite possibly. Vonage will work only with adapters specifically configured

ftopic20469.html

Vonage The 4 prong jack should have 4 color wires, red, green, yellow & black. (if

ftopic20455.html

Vonage I think we all agree that Vonage customer service is often lousy. Now that that's

ftopic20459.html

Vonage Even with your Vonage adapter on a DMZ, the Smoothwall machine would still need

ftopic20398.html

Vonage That's great. Looks like my diagnosis was wrong, but alls well that ends well.

ftopic20433.html

Vonage A picture without Manufacturer and model doesn't do much good. How do the

ftopic20418.html

Vonage You'll do better with this if you post it in the VoIP forum. That's where the networking

ftopic20388.html

Vonage You can get as many lines as you want to pay for, and you have the bandwidth on your

ftopic20372.html

Vonage Gregk, you'll do better with this one if you'll repost it in the VoIP forum. Please

ftopic20091.html

Vonage Are you using a 2.4 ghz cordless phone? if so, there is most likely interference

ftopic20311.html

Vonage thanks both of you, got it working.

ftopic20291.html

Vonage What's the model of your Vonage Adapter?

ftopic20209.html

Vonage "What you want to do: Use your RPT300 as your main routing device, and your

ftopic11773.html

Vonage Tried the multi handset thing. It covers about 3/4 of my house but not my husbands

ftopic20171.html

Vonage Yes.

ftopic19156.html

Vonage With one unplugged, do both lines work well, with one using the house wiring and

ftopic20112.html

Vonage for #2 I'd eliminate all distinction between voice and data. It's all cat5 so

ftopic20105.html

Vonage I have a LinkSys / Vonage PAP2 Ver.2 with firmware version 1.00.16. I saw another

ftopic20073.html

Vonage So i get my D-link VWR vonage capable wireless router today. I usually consider

ftopic20042.html

Vonage G5, you're likely to have some problems with this, because I'm guessing that your

ftopic19990.html

Vonage True, but a lot of people want separate adapters, so they don't lose more than one

ftopic19181.html

Vonage there are modems with phone ports, but they are used by cable company's for their

ftopic17817.html

Vonage I thought I had done my homework before moving to Spain for 1 year & made many

ftopic19949.html

Vonage If the new wireless has good QoS, then plug it into the broadband. Plug the Vonage

ftopic19768.html

Vonage I don't know about the intermittent operation of the corded phone. As for it being

ftopic19532.html

Vonage What I would do (and how it is set up at my house) is put the vonage box after the cable

Vonage Getting back to using Vonage service on a vanaccess device without voxalot. Am

ftopic19650.html

Vonage Why don't you use the motorola device and use it to connect your laptop to it via

ftopic19638.html

Vonage Take a look at how the PBX is installed now. If you see a line going from the PBX to

ftopic19626.html

Vonage Every phone system I've ever had with a built-in answering machine has had a simple

ftopic19628.html

Vonage It would be very odd if this turned out to be the problem, given that things were

ftopic19629.html

Vonage We have had Vonage working just fine in our house or over a year. Last week we had

ftopic8056.html

Vonage I have an old american rotary dial phone in my kitchen, and it works fine with Vonage

ftopic19060.html

Vonage If you mean one of the phone ports 1 or 2 are blinking red/orange then its telling

ftopic19374.html

Vonage The fact that the phone light doesn't flash when you plug the Vonage box into the

ftopic19500.html

Vonage I've had my PAP2 working with a punch down block since day-one with Vonage. Make

ftopic19381.html

Vonage Stay away from the VWR - lots of problems. Search these forums for details. One

ftopic19435.html

Vonage You'll probably get a better response on this if you re-post it over in the VoIP

ftopic17404.html

ftopic17404-10.html

Vonage agree with phillybill....

ftopic19401.html

Vonage You'll get a better response to this if you re-post it in the VoIP forum. That's

ftopic17780.html

Vonage i think there is something wrong with OS? if ur using xp sp2, then the problem might

ftopic19332.html

Vonage Steve is correct in that it is most likely daisy chained and it most likely comes

ftopic19126.html

Vonage Good points. In fact, even if the line seems to be completely dead when you plug

ftopic19127.html

Vonage Can the intercom system pose any additional challenges?

ftopic19088.html

Vonage Test the Installation Don't take it for granted that your coverage and wiring

ftopic19032.html

ftopic19032-10.html

Vonage Since the problem seemed to be in the NIU last time, I'd suggest that you take another

Vonage Thanks guys. Stephen, I really appreciate you pointing that out! You guys are

ftopic18602.html

ftopic18602-10.html

Vonage i'm just a new member here and it's interesting to know that an audio problem that

ftopic18925.html

ftopic18925-10.html

Vonage I'm afraid not, but the alarm company ought to be able to do it.

ftopic18935.html

Vonage Good, we understand what happened. However, a standard RJ11 is a two line jack,

ftopic18909.html

Vonage Thanks for the tip!

ftopic16279.html

Vonage Configuring TCP/IP We recommend setting your TCP/IP for DHCP if you are using

ftopic18699.html

Vonage I'm sooooo glad I installed structured wiring when I re-did the communications

ftopic18616.html

Vonage well that's good to hear that it could be a fluke experience with the error message. Regarding

ftopic18675.html

Vonage Has any gotten this working? Was a piece cake on my shop router wrt54g, I have spent

ftopic18673.html

Vonage Hey- I have Comcast cable internet connected to my computer (it works) and the

ftopic18617.html

Vonage The problem is that the printer and your laptop are on different sub-nets. You

ftopic17767.html

Vonage I agree. As far as determining if there are shorts in the house wiring, first get

ftopic18550.html

Vonage I agree with Steve that unless you need 4 lines, you do not need to change your face

ftopic18483.html

Vonage I agree on all points. It would still be informative to see if any voltage is there.

ftopic18387.html

Vonage I also forgot to mention that I access the internet through a VPN. Does that make

ftopic18427.html

Vonage Steve, I finally got it to go. I had an issue with the power supply. I found one

ftopic18445.html

Page generated by XML-Sitemaps.com - A Google sitemaps and html sitemaps generator