What's the latest on firmware 1.00.55 for the 300.

Posts: 1389 · Posted: Sun Oct 30, 2005 9:49 am Post subject:

I have CID, it takes a few extra rings but it works, and I am on .52

Posts: 4777 · Vonage Forum **MVM** Joined: Aug 30, 2005 Posts: 4777

I don't, with or without extra rings, and correcting the problem is taking too long.

Posts: 1715 · Posted: Sun Oct 30, 2005 1:51 pm Post subject:

CID's been sporadic here, but in the past few days it's been working more often than not. Does seem like a very strange problem. Are any of the non-TI chipset (RT31P2, PAP2) devices having this problem?

Posts: 277 · Posted: Sun Oct 30, 2005 2:08 pm Post subject:

VonageTPA wrote:

Are any of the non-TI chipset (RT31P2, PAP2) devices having this problem?

Nope, CID with my RT31P2 is totally solid, as is everything else with my RT these days. Like I said elsewhere, "if it ain't broke, don't fix it." Smile

Posts: 199 · Vonage Forum Master Joined: Mar 26, 2005 Posts: 199

I had the same problems with .52. But support gladly moved me back to .50. Works better but still has bugs. Curious if .55 will do the job.

Posts: 170 · Vonage Forum Master Joined: Dec 05, 2004 Posts: 170

I haven't any issues with .52. Caller ID and rings work fine. I have an RTP300.

Maaz

Posts: 132 · Vonage Forum Senior Joined: Aug 16, 2005 Posts: 132

I'd hate to say it as I'll probably jinx myself, but my CID, CWCID, CID on forwarded/SimulRing calls to cell, VM, stutter tone, etc. have been working fine 100% with my RTP300 and .52 FW and 3 Uniden Tru88xx sets (no home wiring or custom setttings (DTMF or others) from Vonage CS).

Modem -> RTP300 w/ 1 line to Uniden base -> Wireless router with PCs & laptops.

JINX!

Posts: 199 · Vonage Forum Master Joined: Mar 26, 2005 Posts: 199

hmm.. I have the RTP300 and when I had .52 things worked like crap. Interesting the different responses people are getting.

I'm with Comcast in Denver.

Posts: 533 · Posted: Mon Oct 31, 2005 1:46 pm Post subject:

I have an RPT300 w/ 1.00.52 and am not getting any CID unless I reboot the TA, but I'd have to reboot after every call to get CID for the next call. I've also seen dead-spots during calls. Can't hear caller, caller can't hear me for about 2-4 seconds. Did not see any of these issues with 1.00.50.

Posts: 1389 · Posted: Mon Oct 31, 2005 1:50 pm Post subject:

EzCo wrote:

I have an RPT300 w/ 1.00.55 and am not getting any CID unless I reboot the TA, but I'd have to reboot after every call to get CID for the next call. I've also seen dead-spots during calls. Can't hear caller, caller can't hear me for about 2-4 seconds. Did not see any of these issues with 1.00.50.

Don't you mean 1.00.52?