| Author |
Message |
nrparmar
New Forum Member


Joined: Oct 05, 2005
Posts: 1
|
Does anyone know how to setup the RT31P2 Broadband Router as a bridge? Thanks. |
|
|
|
|
 |
BeeBee
Vonage Forum Associate


Joined: Sep 30, 2005
Posts: 11
|
Funnily enough, I've just done this myself.
Officially, it can't be done, because there doesn't seem to be the option in firmware.
In actual fact though, you can bridge the two interfaces. Here's how I did it:
http://www.vonage-forum.com/ftopic7880.html
Note that the router will not know it is a bridge -- it will still behave as a (broken) router. However, as long as no other device on your network uses it to route, this doesn't matter. Also, in that example, my internal LAN is 192.168.0.0/24 so if yours is different, you'll need to change the IP numbering to suit your situation.
Good luck. |
|
|
|
|
 |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum |
All times are GMT - 5 Hours | |