new RT31P2 firmware

Posts: 3198 · Posted: Thu Aug 11, 2005 5:09 pm Post subject: new RT31P2 firmware

Firmware Version: 1.29.00
Voice Version: 3.1.5(LIc)
Customization: Customized

Posts: 4 · New Forum Member Joined: Jul 21, 2005 Posts: 4

Are you inidicating that a new firmware version is available?

Is it being endorsed by Vonage?

Where can I find it ?

What does it fix?
I know that my my firmware version has a 3 way calling bug that requires a special # code to make it work. I wonder if this is fixed.

I didn't find any downloads of it available at linksys.com

Brent.

Posts: 3198 · Posted: Thu Aug 11, 2005 5:44 pm Post subject:

here is a link to the user guide
ftp://ftp.linksys.com/pdf/rt31p2_ug.pdf

Posts: 605 · Posted: Thu Aug 11, 2005 5:47 pm Post subject:

Who must I e-mail in order to get this firmware pushed to me router?

Posts: 1715 · Posted: Thu Aug 11, 2005 6:38 pm Post subject:

Hmm... I hope an RTP300 update isn't far behind... That said, no amount of firmware updates can fix the poorly designed analog section of the RT31

Posts: 646 · Posted: Thu Aug 11, 2005 7:46 pm Post subject:

I've managed to get new firmware versions before by doing a hard reset. Your results may vary:

Unplug power
Hold down Reset button
Plug in power
wait 20 seconds
Release reset button
Wait for the light to stop blinking

You might want to backup your settings first if you've made any changes you don't want to lose.

Posts: 646 · Posted: Thu Aug 11, 2005 8:18 pm Post subject:

This is the changelog for 3.1.5 on the Sipura SPA-2000 which the RT31P2 is based on:

http://www.sipura.com/Documents/rnote/rn2k-3.1.5.htm

Some of the changes might also apply to the RT31P2, but I would advise reading it with skepticism.

Posts: 1 · New Forum Member Joined: Aug 11, 2005 Posts: 1

Does this version of the firmware fix the inbound and the outbound PPTP issues, and not routing protocol 47.

Posts: 1 · New Forum Member Joined: Aug 23, 2005 Posts: 1

My RT31P2 will no longer forward my requests to my server when I use the public IP address from behind the router (loopback)... it worked with version 1.28.

Anyone else experiencing this?

Posts: 28 · Posted: Sat Sep 24, 2005 6:09 pm Post subject:

Anyone else have this firmware as yet? I am still on 1.28, do you have to ask vonage for the upgrade?