pap2 web-based config/status page

Posts: 6 · New Forum Member Joined: Jul 25, 2005 Posts: 6

Does the pap2 have a web-based config/status page kinda like the routers have from linksys..

Like http://192.168.1.100 is my phone adapter, and i just get page cannot be displayed.. How does this work if anyone knows?

Posts: 646 · Posted: Mon Jul 25, 2005 12:55 am Post subject:

I don't think it has a customer-accessible webpage. Everything can be set up using the phone menus.

Posts: 3198 · Posted: Mon Jul 25, 2005 8:25 am Post subject:

it has one but it's (b)locked by vonage as soon as it connects to their servers. there are one or two multipage threads on unlocking it, but it doesn't seem to work for most people.

Posts: 1715 · Posted: Mon Jul 25, 2005 10:14 am Post subject:

reebok wrote:

it has one but it's (b)locked by vonage as soon as it connects to their servers. there are one or two multipage threads on unlocking it, but it doesn't seem to work for most people.

wait... you mean a virgin (never taken out of the box) PAP2 isn't locked until it hits the 'net? In such a case, is it possible to play with it and change the settings on it before plugging into the 'net to prevent it from locking itself?

Posts: 3198 · Posted: Mon Jul 25, 2005 11:13 am Post subject:

that was the case (perhaps newer ones have it disabled from the get go, not sure) it's difficult because who tries to access the page before connecting it to the internet? usually that's one and the same (hooking it to a router thus giving it lan and net access)
I'm almost 100% sure you can't do anything to it besides what you can do with the IVR menu.

Posts: 6 · New Forum Member Joined: Jul 25, 2005 Posts: 6

reebok wrote:

it has one but it's (b)locked by vonage as soon as it connects to their servers. there are one or two multipage threads on unlocking it, but it doesn't seem to work for most people.

Where can i find threads on unlocking pap2 IVR menu's?

Posts: 103 · Posted: Tue Jul 26, 2005 10:59 pm Post subject: seetins and voice menus

There is a way, described in the manual, to check and alter the settings on teh PAP2. They are access by pressing touch tone codes, and reported back through a voice synthesizer through your phone. You can change IP numbers and all that via the touch tone menus. Look in your PAP2 manual.

Posts: 1715 · Posted: Wed Jul 27, 2005 9:33 am Post subject:

A followup on my post earlier... got my RT31P2 in the mail yesterday and plugged it in without letting it see the 'net... It automatically started hunting for tftp.vonage.com and the voice screens were blocked.

Posts: 5 · New Forum Member Joined: Jul 14, 2005 Posts: 5

Hey splitech I read your post in another topic (locked thread)
How did you unlock your adaptor ?
I know that after that vonage did not work and you had some problems but I still want to know