US Robotics 802.11g wireless router

Posts: 6

I am a new customer. I haven't got my VT100x ATA device yet. Before it arrives I thought I would ask some of you experienced folks about any "gotchas" or tips about using the VT100x with a US Robotics 802.11g wireless turbo router.

From what I have read so far, the easiest approach with the fewest problems is:

Internet ---> Router ---> VT100x ---> Phone line

Are there any recommended settings on this router I should make for best results?

Are there any recommended settings on the VT100x device I should make when using it this way?

Bob Carroll, http://las-vegas-shopping.net

Posts: 83 · Vonage Forum Senior Joined: Nov 16, 2003 Posts: 83

If you router is UPnP, you won't have to do anyting. Just plug the VT1005 into the router. If it is not UPnP, you will have to do port forwarding. This is documented on the Vonage web site. Have fun.

Posts: 6 · Posted: Sun Dec 28, 2003 11:38 am Post subject:

Maniac8888 wrote:

If you router is UPnP, you won't have to do anyting. Just plug the VT1005 into the router. If it is not UPnP, you will have to do port forwarding. This is documented on the Vonage web site. Have fun.

Thanks, I checked the online documentation and this router is UPnP enabled by default.

Bob Carroll, http://www.las-vegas-shopping.net

Posts: 83 · Vonage Forum Senior Joined: Nov 16, 2003 Posts: 83

You should be good to go. Good luck!