New Firmware for RT31P2 Device Released

Posts: 176 · Posted: Fri Feb 18, 2005 12:17 pm Post subject:

My QOS defaulted at 256 with the new firmware, no auto setting, like before.

Posts: 16 · Vonage Forum Associate Joined: Oct 21, 2004 Posts: 16

How are you guys getting the update?? ssantana hasn't replied to my PM yet.

I have had remote update on since yesterday and I still at 1.26.0.1

I tried doing it manually, held my breath when I rebooted the router. The router came back up just fine but it still shows 1.26.0.1.

New fax line is in and working great but, now I have to listen to the phaser noise again.

Posts: 176 · Posted: Fri Feb 18, 2005 5:09 pm Post subject:

I never asked for it, it just showed up. And like I reported earlier, I have remote updates turned off. Vonage can do it anyway. I guess they are working their way through the customers that have the RT31P2.

Posts: 68 · Full Forum Member Joined: Feb 14, 2005 Posts: 68

Hope they get mine soon, what did you guys PM ssantana? Account number or just the box's ip? Whatever it is, I'd like to get my rt31's firmware up to 1.27 soon, the daily dump is driving me insane.

Posts: 3198 · Posted: Fri Feb 18, 2005 5:46 pm Post subject:

this information is in the first few posts of this thread.

Posts: 222 · Posted: Fri Feb 18, 2005 5:48 pm Post subject:

OoTLink wrote:

Hope they get mine soon, what did you guys PM ssantana? Account number or just the box's ip? Whatever it is, I'd like to get my rt31's firmware up to 1.27 soon, the daily dump is driving me insane.

Send him your name as it appears on the account, the MAC address of your RT31P2 and your Vonage phone number.

Also, be sure to unplug any shorted RJ11 cables, dongles or off-hook phones that you may have put in the unused phone port #2 to stop the hum/hiss problem. If there is anything like that in that port, the update will be rejected by the router.

Fletcher

Posts: 82 · Posted: Fri Feb 18, 2005 5:50 pm Post subject:

OK....well either way set ur QOS to 512. It will solve your reboot issues big time. I have not had one since doing this. cheers

Posts: 16 · Vonage Forum Associate Joined: Oct 21, 2004 Posts: 16

just for grins I power cycled the router when I got home today it's still at 1.26.0.1 Sad

I re PM'd ssantana....

Maybe they stopped pushing the firmware update because it toasted some people's routers.

Posts: 222 · Posted: Fri Feb 18, 2005 7:11 pm Post subject:

Ziptar wrote:

just for grins I power cycled the router when I got home today it's still at 1.26.0.1 Sad

I re PM'd ssantana....

Maybe they stopped pushing the firmware update because it toasted some people's routers.

You might want to do a reset instead of just a power cycle. Also, make sure you don't have anything in phone port #2 if it does not have an active number registered to it as a fax or second Vonage line.

If you do a reset, hold the reset button for at least 15 seconds before releasing it.

Fletcher

Posts: 16 · Vonage Forum Associate Joined: Oct 21, 2004 Posts: 16

Fletcher wrote:

You might want to do a reset instead of just a power cycle. Also, make sure you don't have anything in phone port #2 if it does not have an active number registered to it as a fax or second Vonage line.

If you do a reset, hold the reset button for at least 15 seconds before releasing it.

Fletcher

Thanks for the tip, I have a register fax number and fax machine in line 2. Did the reset No dice though...