VT2442-VD with Clear Wireless - connection Issues

Posts: 1 · New Forum Member Joined: Dec 21, 2009 Posts: 1

I have a Motorolla VT2442-VD that worked very well when connected to Cox Communications Cable Modem.

I moved to a new house, Cox will not be installed for quite some time, so in the meantime, I have a Clear Wireless home modem. (Motorolla CPEi 25150)

It now seems that it cannot connect now. I have internet connection, but no phone through Vonage.

It seems from the info I have been reading that they might be trying to communicate on the same IP. I am trying to change to IP but cannot seem to log in to the Vonage router. Maybe this is NOT the right approach?

Any help would be MUCH appreciated.

Thanks

Posts: 47 · Full Forum Member Joined: Jun 03, 2005 Posts: 47

You probably haven't had much luck since this is the forum for UK users Wink

Posts: 86 · Vonage Forum Senior Joined: Jan 03, 2009 Posts: 86

If you have the Motorola unit from Clear it uses the 192.168.15.0 network address with a dhcp server address of 192.168.15.1 that hands out addressing the 192.168.15.0 (2-254) address space. Since the Vonage telephone adapter uses the same private class C network address 192.168.15.0 a conflict will occur.
Connect a computer to the yellow port of the Vonage box and access the config page by entering 192.168.15.1 in your address bar of a browser. The login credentials should be UID router and PW router. Change the LAN IP from 192.168.15.1 to 192.168.16.1.

Posts: 1 · New Forum Member Joined: Feb 28, 2010 Posts: 1

some calling cards can be find here at low cost. so please check this site:
Calling CardsCalling Cards