How to setup printer/fax machine with Vonage

Posts: 1 · New Forum Member Joined: Dec 01, 2009 Posts: 1

Have HP Officejet 4315v all in one. Have no idea how to hook up with Vonage. Only want to fax out and not receive. Sorry if this has been discussed a lot. I'm new. Help, please.

Grace

Posts: 227 · Posted: Tue Dec 01, 2009 7:48 am Post subject:

Your all-in-one probably has two telephone jacks on its rear panel somewhere. One of these is supposed to be connected to a wall jack that supplies dial tone; the other is supposed to be connected to a telephone set (unless the all-in-one has its own handset). Plug a modular telephone cord into the jack on the back of the all-in-one that is supposed to go to the wall jack. Plug the other end of this cord into the Phone1 or Phone2 jack on your Vonage box. That's it!

Remember, the Phone jack on your Vonage box supplies dial tone; it replaces the wall jack that supplies dial tone from your traditional phone company. Whatever was plugged into your wall jack (telephone, answering machine, fax machine, etc) can now be plugged into the Phone jack on your Vonage box.