Unable to get in to Dlink VTA-VR - portal

Posts: 5 · New Forum Member Joined: Sep 12, 2008 Posts: 5

yeah its just an adapter.

Hopefully everything works well tonight.

I'll keep you guys posted.

Posts: 5 · New Forum Member Joined: Sep 12, 2008 Posts: 5

yeah its just an adapter.

Hopefully everything works well tonight.

I'll keep you guys posted.

Posts: 2 · New Forum Member Joined: Sep 12, 2008 Posts: 2

The IP address is usually assigned from the router the D-Link VTA-VD is connected to. Please note that if the D-Link VTA is not able to obtain an IP address from the router, it will auto-configure itself with the IP address of 192.168.15.254.

You will need to configure your computer with a static IP address matching the same subnet as the auto-configured address of the D-Link VTA-VD (i.e., static IP address=192.168.15.2, subnet mask= 255.255.255.0, default gateway = 192.168.15.254)

Hopefully this will work out for you..

Posts: 628 · Posted: Fri Sep 12, 2008 7:28 pm Post subject:

He can't do that and is what the problem is. His original post states he had assigned the VTA with a static IP from the previous network. Now that it is a different network range, only by factory resetting the VTA will it be able to use DHCP to pull down the current network IP data from DHCP.

Posts: 2 · New Forum Member Joined: Sep 12, 2008 Posts: 2

Ok, I missed that the first time thru..

Sorry for the mis post..

Too much going on tonite should be sleeping or drinking wait reverse that.. Smile

Qube