Linksys PAP2... how to make my caller ID private

Posts: 260 · Posted: Sat Dec 02, 2006 2:47 pm Post subject:

raijenkins wrote:

nope its the version 1,
the only difference with version 2 is that it has a reset button on the back,

You are getting this report from the router? What router do you have ?

Posts: 135 · Posted: Sat Dec 02, 2006 2:49 pm Post subject:

im using a PSUS4...

Posts: 260 · Posted: Sat Dec 02, 2006 2:59 pm Post subject:

raijenkins wrote:

im using a PSUS4...

Ok. This clarifies things. Since your router and ATA are both Linksys, the router is able to gather statistics on the ATA. What got this whole discussion started was whether the config pages on the PAP2 itself could be accessed. The answer is still no, since the PAP2 is locked to Vonage and there is nothing to change.

Posts: 135 · Posted: Sat Dec 02, 2006 3:36 pm Post subject:

oh ok
but i have accessed it, well it seems it doenst work on your end

Posts: 260 · Posted: Sat Dec 02, 2006 3:50 pm Post subject:

My router is a d-link and does not have that feature.

Posts: 135 · Posted: Sat Dec 02, 2006 4:27 pm Post subject:

oh i see,
but if you will have the chance you can try do it on your end,
so you can see the set-up page of the pap2

Posts: 56 · Full Forum Member Joined: Nov 27, 2006 Posts: 56

On a Linksys PAP2 you can change the following:

* Static address and et. al.
* Local timezone
* New Password
* Enable SSH
* Syslog loging

The IP address by default is set by the router via DHCP. You can then change it to a static address. Simply go to the URL based on the IP address, ie:

http://192.168.x.x

Default username/password is admin/<nopassword>