| Author |
Message |
addweb
Full Forum Member


Joined: Sep 02, 2005
Posts: 60
|
| Code: | LinkSys Cable Modem -> Linksys WRT54GL -> RTP300 \->PCs |
I would like to assign a static IP address to my RTP300 which sits behind my linksys router.
The RTP 300 gets and ip of 192.168.10.140, and locally stays as 192.168.15.1. With this my phone works fine, but since no PCs are plugged directly into the RTP300 i cant get to the web based admin.
What i want to do it set the RTP300 to a static IP address, say 192.168.10.10, and then be able to get to the web based admin thru the pcs that are already connected to my linksys.
Each time I tried to set the static ip to the 192.168.10.x, i couldnt get back into the router.
Any help would be appreciated. |
Last edited by addweb on Tue Feb 14, 2006 10:57 pm; edited 1 time in total |
|
|
|
 |
blakadher
Vonage Forum Evangelist


Joined: Dec 23, 2005
Posts: 476
Location: Vancouver, WA
|
Does your Linksys router (not the RTP300) allow for assigning a specific IP to a MAC? If it does, then you can assign one to the RTP300 and it will always have that IP.
If the Linksys router does not support IP assignment by MAC then you'll have to change the RTP300 from obtaining an IP automatically to having a static IP. You'll then get a new set of entry fields where you can assign an IP outside the range that your Linksys DHCP assigns.
As for accessing the admin functions on the RTP300, you'll have to hook up a PC to it, go into admin, and enable remote access. It'll default to port 8080 and then you can get to the admin page from your other PCs using http://assignedIP:8080. |
_________________ Blakadher Legend RTP300 behind a D-Link 614+ on Comcast http://vonage.luthertech.com |
|
|
|
 |
addweb
Full Forum Member


Joined: Sep 02, 2005
Posts: 60
|
SO what your sayings as it it now...
I can connect a pc to the RTP300, enable remote admin on port 8080 and then i can connect the pc to the WRT54GL and be able to get to the rtp300 thru http://192.168.10.140:8080? |
|
|
|
|
 |
blakadher
Vonage Forum Evangelist


Joined: Dec 23, 2005
Posts: 476
Location: Vancouver, WA
|
| addweb wrote: | SO what your sayings as it it now...
I can connect a pc to the RTP300, enable remote admin on port 8080 and then i can connect the pc to the WRT54GL and be able to get to the rtp300 thru http://192.168.10.140:8080? |
Yes, if your RTP300 has the assigned IP of 192.168.10.140. |
_________________ Blakadher Legend RTP300 behind a D-Link 614+ on Comcast http://vonage.luthertech.com |
|
|
|
 |
NateHoy
Vonage Forum MVM


Joined: Nov 01, 2005
Posts: 2257
Location: New England
|
| addweb wrote: | SO what your sayings as it it now...
I can connect a pc to the RTP300, enable remote admin on port 8080 and then i can connect the pc to the WRT54GL and be able to get to the rtp300 thru http://192.168.10.140:8080? |
If you have a WRT54GL, here's the step-by-step on putting an RTP300 behind it and enabling remote administration.
http://vonage.nmhoy.net/wrt54gl.html |
_________________ Comcast Cable (3m down / 256k up) -> Linksys BEFCMU10 v2 (DOCSIS 1.0) -> WRT54G v4 ("Tomato" firmware) -> the rest of my network including a WRTP54G (Firmware: 5.01.04) My Vonage Self-Help Guides: http://vonage.nmhoy.net |
|
|
|
 |
addweb
Full Forum Member


Joined: Sep 02, 2005
Posts: 60
|
Thanks again blakadher,NateHoy. You really hooked me up! |
|
|
|
|
 |
addweb
Full Forum Member


Joined: Sep 02, 2005
Posts: 60
|
Worked perfectly first time!
Got QOS working now too, so check out NateHOy's guide if you need help! |
|
|
|
|
 |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum |
All times are GMT - 5 Hours | |