 |
 | Vonage Forum Menu |
| | |
| Vonage Forums |
|
|
| | | |
| Vonage In The News |
| | |
| Vonage User Reviews |
| | |
| |
Vonage Forums Archive By Date November 1, 2005 |
|
|
Select The Post You Would Like To View
• No joy here yet....
• You have a problem with your ISP. Your upload speed is too low and your packet discards...
• Well, the general push has happened. I just got it around 11:00 PM EST on 11/1.
Didn't...
• Just did a froogle on it. Looks like around $70 bucks or so....
• looks like a hardware version of QOS settings - could be good for people who can't...
• Has anyone tried this yet
DLink VoIP Accelerator
didn't find any topics...
• I just had 1.0.55 pushed to my box automatically...
• Glad you like your new RTP300, but that line the rep gave you is absolute BS. DOCSIS...
• I have been with Vonage about 8 months, recently i found there's a problem of their...
• ok, so what do you do with the rest of the data?
it does kinda seem like they may...
• Glad you found a solution that works for you. Now start enjoying those lower phone...
• I got RTP300 and it is quiet. Compared to the two PAP2 models I tried, it is very quiet.
The...
• Upload speeds seem to be consistent at ~400kbps and download varies from anywhere...
• Location: Big Bend, WI
ISP - Road Runner - Milwaukee
My Results from vonage...
• Doesn't look too bad. How are your upload and download speeds? Have you tried any...
• Hey thanks everyone for your replies! I ditched the Linksys because of some excess...
• I tried every combination of power cycling known to man. Luckily, I have all of...
• I know that there have been several post like this one, but none of them have fully...
• the best (and only for me) advantage to sveasoft is ip addressing by mac. that's...
• I've got the exact same problem. I ran a port scan from DSLReports and it didn't...
• same here - (RTP-300) after installing .55 firmware and confirming it tested...
• I sent them an email asking for clarification on their service. Here is my email...
• But Galion is in 419....
• Your Vonage router has a USB port on it?...
• It's a tossup between a customer service call to Vonage or one to your ISP. I'd go...
• You are so tempting me. I may just go ahead and put it on. But I'm going to wait until...
• I'm having the same exact problem - several times a week the RT31P2 stops responding...
• I pay $4.95 per month for the 800 number. If you don't use over 100 minutes incoming...
• The numbers in 559,661,209 are't portable either!...
• Just got off the phone with Vonage Tech Support and they pushed the new 1.00.55...
• I called up Vonage, worked my way through the phone tree and within 5 minutes I was...
• Gah. I dl'd the file and then...
Can the flash only happen through the USB interface?...
• Unfortunately, you're paying a lot of extra money to have the 800 number. What...
• Have you tried power cycling the router? I'm wondering if maybe it needs that in...
• I'm still waiting for the 239 area code to become available with Vonage... So far...
• FWIW, I have >20 WRT54GS routers in the field, each running Sveasoft (some...
• Yes, for me it fixed the "short ring" problem and the "busy signal on remote disconnect"...
• As a first step, I'd try going back to the original configuration and seeing if...
• Given the length of this problem....they really should have forced a downgrade...
• That's great! When you talked to them, did they indicate when the general push...
• Yes, it's getting pretty ridiculous....
• You're right, I did. In any case, I don't see any explanation for your problem in...
• I still had US style ringing this morning
(Have Vonage heard about configuration...
• location: Colorado
ISP: Adelphia / Cable
Speeds: Communications 1.8 megabits...
• I have some good news.
http://hraunfoss.fcc.gov/edocs_public/attachmatch/DOC-261936A1.doc
The...
• Well the FCC approved his merger with AT&T today, so who knows- maybe he "ain't...
• Yeah, I had a similar problem myself recently. I looked at my account one night...
• Thread from ColdGin with link to .55 FW:
http://www.vonage-forum.com/ftopic9255.html...
• follow-up, I unplugged a device from my in-house wiring, and it worked... this...
• file has been posted on different thread
FYI - this upgrade DID NOT fix my caller...
• I had the same problem with my RT31P2. Wired, wireless made no difference. Calls...
• http://httpconfig.vonage.net/rt-11.1.0-r021-1.00.55-r051013.img
http://httpconfig.vonage.net/wrt-...
• Hey, we'll cut you some slack - after all you are the Member of the Week!! :-D...
• One selling point is the toll free number. I can't get a local number in my area code...
• Oops. I should have looked back further. Now I am going to go home and tinker....
• Out of curiosity why did you leave the WRT54G? Mine has been very stable. I want...
• I started this thread because I was seeing problems with my VM notification, and...
• did you look two posts above yours? it contains reference to that users device...
• I'm beginning to wonder when we see anomalies like this if we should tally which...
• MrKenmore, you are right on target. It is even more serious to openly make that...
• anyone have the file name?...
• Just wondering if anyone knows when Vonage will be in central CA....
• I just started with Vonage and found it pretty easy to set up. What I did was different...
• I did the same as someone above suggested, I changed my ADT ring and tip wiring myself...
• Just had it pushed to me, did a few test calls and the CID showed up almost immediately....
• I have it coming to me right now......
• First, here is my configuration
Mototorola Cable Modem > Dlink DGL-4300...
• Check this out... maybe we are just driving ourselves nuts and there is an inconsistent...
• They're probably getting ready to do a mass dump of it in the next few days, but they'll...
• As I was doing some searching on this forum a week or so ago (to troubleshoot my problem...
• Interesting, 1.00.55 wasn't on their servers a couple of days ago. It's there...
• I have a WRTP54G, not a 300, but the unit was upgraded recently to the infamous 1.0.52...
• Will do....
• wow they pushed .55 early to you eh? nice, you seem to be the first. post over in the...
• Well, on the Airport there's no UDP, TCP, etc ... You just add the port number in...
• After losing connection again, I called Vonage asking for an update on when this...
• great thanks...
• After leaving myself more messages than I care to admit, what I've discovered...
• techpro -
Hmm. I never got that one, but I don't think I ever registered my router...
• I have sent faxes from my computer over my Vonage line....
• No, I only contacted Linksys because *they* sent me an e-mail out of the blue. I...
• OK, that's fair, and I do see that now. The WRTP54G is a router in addition to being...
• 108Kbps is barely acceptable for Vonage service, and is likely the primary cause...
• ok, uh, that list is for routers. not for vonage devices. routers that a person...
• I'm confused. Did you contact Linksys for assistance (logical step, I know) and...
• I have the WRTP54G. Is that on the same software upgrade path (in terms of release...
• This is where I was looking for the WRTP54G router:
http://www.vonage.com/help.php?article=188&am...
• I have recently - within the past week - had a problem with the stutter and MWI. I...
• Wow. This is basically MCI's claim that AT&T won't give them equal access...
• I'm suddenly having trouble with calls being dropped after about 30 seconds....
• would this work
http://www.copycall.co.uk/CopyCall.html...
• my gosh I actually helped someone. And look at what I got....
• We did this with the vonage tech so far so good we will see....
• probably out of stock since they definitely offer 209. not sure about the other...
• That's a good point.
I'd love to be notified somehow, or have a place to look...
• When you have a regular POTS line and a computer with a modem you are able to send...
• Anybody know anything about these area codes? There is over 2.5 Millilon people...
• Thanks....
• heh, good luck with it.
here is the new firmware thread
http://www.vonage-forum.com/ftopic9178.htm...
• Sorry, wasn't trying to accuse anyone of passing the buck or starting a conspiracy...
• I thought I read a post here that said it was active or testing in the washington...
• there are a couple multipage threads going on right now about firmware for this...
• I would think your best option would be to have it:
[Modem]-[Netgear]-[Vonage...
• HI there,
I work at Talkswitch so I can help answer your question.
You...
• WE THE PEOPLE need to wake up and realize that the Big Companies do not grow with...
• Well, many of my problems have been pretty recent. Up until the last week or so,...
• I also bought the WRTP54G within a few months and have firmware version 1.00.52.
What's...
• I also have a WRTP54G, purchased a few months ago. My firmware version reads 1.00.52.
I'd...
• I was also running into this problem here is what I did.
I set the call prefix...
• Vonage was able to activate my IP8100-2 over the phone - I didn't have to go back...
• Ok this is what happens.
I use netgear for my router; I have to for the reason of...
• Who are they? I'll assume vonage Tech Support on this one.
What is going on?...
• I've searched through the forums about E911. To date I think this information...
• I opened up the following:
SIP ports 5060 through 5061/UDP
NTP port 123/UDP
TFTP...
• I will look into this set up.
thanks...
• Which ports did you open on your router?
When I get a message the phone will...
• yeah you asked a question about your device, it was answered, you said thanks,...
• this thread Image of my dual router configuration I created in paint.... shows...
• Anyone hear anything more about the WiFi phones since Vonage has missed 4 release...
• huh did you read the thread?...
• what are you talking about?...
• I have been having similar problems now that I dumped a Linksys WRT54G in place...
• They still can not figure out what is going on. I have been vonage for 2 years now...
• No, Time Warner RoadRunner. I tried the method described elsewhere in this forum...
• Edward Whitacre has been whining about this for a long time. He whins about it everywhere....
• VonageTPA's solution didn't work for me at all as I needed the LAN side for an internet...
• I wish that was the case....but I've been using the same basic config with my RTP300...
Select The Day You Would Like To View
• November 30, 2005
• November 29, 2005
• November 28, 2005
• November 27, 2005
• November 26, 2005
• November 25, 2005
• November 24, 2005
• November 23, 2005
• November 22, 2005
• November 21, 2005
• November 20, 2005
• November 19, 2005
• November 18, 2005
• November 17, 2005
• November 16, 2005
• November 15, 2005
• November 14, 2005
• November 13, 2005
• November 12, 2005
• November 11, 2005
• November 10, 2005
• November 09, 2005
• November 08, 2005
• November 07, 2005
• November 06, 2005
• November 05, 2005
• November 04, 2005
• November 03, 2005
• November 02, 2005
Select The Month You Would Like To View
• March, 2010
• February, 2010
• January, 2010
• December, 2009
• October, 2009
• September, 2009
• August, 2009
• July, 2009
• June, 2009
• May, 2009
• April, 2009
• March, 2009
• February, 2009
• January, 2009
• December, 2008
• October, 2008
• September, 2008
• August, 2008
• July, 2008
• June, 2008
• May, 2008
• April, 2008
• March, 2008
• February, 2008
• January, 2008
• December, 2007
• October, 2007
• September, 2007
• August, 2007
• July, 2007
• June, 2007
• May, 2007
• April, 2007
• March, 2007
• February, 2007
• January, 2007
• December, 2006
• October, 2006
• September, 2006
• August, 2006
• July, 2006
• June, 2006
• May, 2006
• April, 2006
• March, 2006
• February, 2006
• January, 2006
• December, 2005
• October, 2005
• September, 2005
• August, 2005
• July, 2005
• June, 2005
• May, 2005
• April, 2005
• March, 2005
• February, 2005
• January, 2005
• December, 2004
• October, 2004
• September, 2004
• July, 2004
• June, 2004
• May, 2004
• April, 2004
• March, 2004
• February, 2004
• January, 2004
• December, 2003
• October, 2003
• September, 2003
• August, 2003
• July, 2003
• June, 2003
• May, 2003
• April, 2003
• March, 2003
|
|
|
| |
| Vonage Service Plans |
| | |
| Vonage VoIP Members |
| | |
| Vonage Stock Price |
|
Value: 1.34
Change:  -0.02
Up to 15 Minute Delay | | | |
| Site Search |
| | |
|
|
Vonage VoIP Phone Service is redefining communications by offering consumers
& small business VoIP Internet phones, an affordable alternative to traditional phone service.
The Vonage VoIP Forum Generated This Page In: 0.64 Seconds and 282 Pages In The Last 60 Seconds
The Vonage VoIP Forum
|
Members
New 
New Today 6
Yesterday 7
Total 56048
Who Is On Site
Visitors 266
Members 0
Total 266