 |
 | Vonage Forum Menu |
| | |
| Vonage Forums |
|
|
| | | |
| Vonage In The News |
| | |
| Vonage User Reviews |
| | |
| |
Vonage Forums Archive By Date June 14, 2005 |
|
|
Select The Post You Would Like To View
• I believe the correct answer is "Everything should work fine."
Don't be overly...
• Is your old router just a basic wired router? If so, remove it and connect the RT31P2...
• When I installed Vonage - I set it up with my existing cable modem, and linksys router,...
• About the switch... the four ports on the router are basically just linked to each...
• Everything will work fine....
• I don't know of a specific reason, but it seems to be a problem with your old router....
• One more question regarding turning the BEFSR41 into a switch.
So, just to...
• I don't think there's a "perfect" solution here, but you can probably get pretty...
• Many thanks for your response. I can certainly give that a try. But it seems strange...
• I'd like to see the cutomer service and features upgraded rather than seeing all...
• Ditch the BEFSR41. Put the RT31P2 in its place.
If you need more ports, you...
• I had read in an previous thread (cannot locate this at the moment though), that...
• A router let's you generate up to 255 private IP's, in the 192.168.xxx.xxx range....
• I'll keep it brief as I know this is familiar to some of you:
February 22, 2005 Awaiting...
• Hello,
I am quite possibly having a similar issue to yours. I have several computers,...
• Well, Natasha, you sold me!
I just preordered the Uniden CLX465.
Thank...
• Thanks for the suggestions. I'll try them tonight and let you know if I can get it...
• Someones advise here would be most appreciated.
One of my computers cannot...
• The RT41P2 seems to boast a better firewall, in its literature, then the RT31P2,...
• bump
:?: :?: :?: :?: :?:...
• I'm assuming it's possible to use a mix of 5.8 (Uniden 8865-2) with a 900 mhz phone....
• What is the recommended setup for using two RT31P2s with the same Internet connection?...
• It can be done...but Vonage will not do it.......
• Just so you know.. the ATA itself sets it's TOS high... so you can just look at it.....
• Primaries today in Virginia. They say the elections are significant in that they...
• while I don't know much about emule im guessin I'd have to set up port for that too....
• Why not just use emule :lol:
http://www.emule-project.net/home/perl/general.cgi?l=1...
• Thanks for the help, I am kind of a newbie and forgot to mention that my DSL modem...
• Search the forum for a complete answer.
For example: http://www.vonage-forum.com/ftopic2590.html...
• Try using this setup with the wireless router. I've used it since day one without...
• Throttling is kind of a good especially on the slower connection speeds but all...
• I also posted on how I made my cable here .
You could use a USB-to-serial adapter...
• I'm new to the forum.
I haven't switched to Vonage yet.
Question is....will...
• I just ran a net tester and found that my comp was not responding to TCP or UDP packages...
• Well the cable guy came out spent two seconds poking around outside & a few...
• The one call I made to Focal was all I needed. They gave me a transfer date and the...
• Update:
So Qwest released my number yesterday (June 13) as they said they...
• yup the ports are open. WinMX would't do anyhitng period until I did open them....
• You're right. It didn't work. It said "Update Failed" in red letters. I've tried...
• If you run through the wizard, does it say that your TCP and UDP ports really are...
• Push for the new router....I had the same issue, and they offered to send me a new...
• Here's what I did:
Connected ethernet cable as follows:
Cable modem-Vonage...
• no its not a fake file thing, I've spent my time on WinMX and know how to find those...
• Part of the problem is that WinMX is getting flooded with fake files. Right-click...
• So here is my problem. Im using the RT31P2 Cisco/Linksys router and am trying to...
• Hi Ronin,
Not much new to report, here's what I've got:
I have (for now)...
• Hi, there.
I've had similar problems with my RT31P2 and wonder if you've resolved...
• Yes, you could do this if your cable company would allow you to have two IP addresses.
You...
• The Voice QOS was set to 512, which is my max advertised upload speed. I changed...
• What are the model numbers of your cable modem and router?...
• I believe both Ping reports are contained in my previous post. One had default...
• sorry to be harsh, but please re-read the posts.
"I tried out Panasonic's...
• I think those passwords are device specific....
• Natasha,
I have another 5.8 system in my home, but I am glad
to hear you are...
• Thanks....
• i restated my comment on range. read the rest of the posts and you should be able...
• You QOS setting can be reached by entering 192.168.15.1 into your browser. Next...
• Hello I hope someone can help.
If we make or recieve a phone call, we get disconnected...
• OK, so what are my options? Do I need a new service provider? It seems to be more than...
• Hello.
I'm not sure if this should be a new post or not.
I changed the DNS...
• well you can try it but as stated in this thread and others it probably won't work....
• -
What's better the Linksys WRT54GP2 or the WRTP54G
I just ordered WRT54GP2...
• you have bad packet loss which is probably the root of all your problems. I have...
• I am a new Vonage customer and am going to be receiving my Linksys RT31P2 phone adapter...
• I have an existing Linksys secure wireless network (2 computers, wireless printer,...
• Roger,
I just PM'd you. let's talk that way for now....
• You are right it should be a SB4200.
When I hooked it up using your instructions...
• Roger,
thank you for getting back to me so quickly. So we now have one confirmed...
• 1. Yes I used the same cable to connect my pc to the internet and it works.
2....
• Roger,
Let's go through a few more possibilities before we give up. To double...
• KDWycha, it's unlikely that there is a router burnout.
phatjd, I concur with...
• I could understand your frustration with VTech. I bought a 900 mhz one in the past...
• I have a big problem with vtech. I've owner 3 and all had awful static and poor sound....
• When I changed dftp to tftp, it worked. My PAP2 is now upgraded to 2.00.14a.
Just...
• It seems that once every year I have to have the cable co come out and replace my modem....
• I have heard that you can burn out the router if you have too many phones connected...
• Strange problem :? Break it down. Find the closest wall jack test it for dial tone.then...
• I'm still having the same problems with Vonage. The cable company is supposed...
• As noted . Just unplug the rj45 with the white/ blue wires, and tag it!...
• I'll post since I have scoured these boards for help and something finally worked....
• Hey Guys!
First time here. Found this forum while attempting to
search...
• I've been using a Vonage business account with an additional fax line for about...
• Greetings,
I wrote a post regarding my troubles with the WRT54GP2.
http://www.vonage-forum.co...
• Hello,
I have SBC in Michigan. I signed up for Vonage on Jan 26. My LNP went through...
• Been with Vonage since Jan of this year. My number ported over last March. All I...
• Does it exist, how can we sign up :?:...
• Yes the speakerphone is great when waiting on hold for 50 mins to speak to a vonage...
• Alot of us had to go through the old port system where you fax in your letter of authorazation...
• I signed up for vonage less than 3 weeks ago. Only paid $9.95 for shipping, everything...
• Why cant we get the 209 area code . I have checked all voip providers and no one is...
• NHTracker - My initial Pingplotter results were set to defaults. I just switched...
• ](*,)...
• Here are my results from Testmyvoip:
Me to Boston:
Media Quality MOS...
• Read this thread . Everything you need should be there (I just made my first post...
• Thanks :o...
• It hasn't worked for me...and they've been working on the
problem for over a...
• i have the same problem. it's a good thing i have 2 phone lines. when an AT&T...
• Well, you know, after reading that I decided to move it back in from the DMZ, turn...
• I am in the exact same boat. Emails through the contact link on the vonage page do...
• Greetings,
Here's a fairly frustrating situation. I recently purchased...
• Vonage is now $10/month more expensive then their main competitor for the Unlimited...
• I have been waiting for month to get my landline number ported from Sprint to Vonage....
• I was having the same problem, but when trying to put the initial setup call through....
• ISP: Roadrunner (time warner)
Cable modem : toshiba pcx2200
Router/gateway/phone...
• My R10 is coming on Friday and I ordered the serial null modem cable since I'm on...
• upon further review ive found that when the wireless router is not used (ie. Cable...
• From what I understand, that is the only difference. Vonage does run some sort...
• let me clear up some confusion, as I said I updated firmware for router not the pap2....
• No:
However, numerous Vonage employees do post here, most but not all...
• the rt is currently in port 2 of the wrt... maybe ill mess with the qos stuff...
any...
• I see you're the Site Admin. Are you also a Vonage employee?
JOhn...
• Looked at that and everything is set to obtain address automaticly.
I appreciate...
• well, maybe someone has an idea but I don't really. fwiw, I have qos for the rt set...
• Most people here are not Vonage employees- just the few people who have "Vonage...
• I leave it on 50% and if using a headset, I move it even lower. It's a great unit....
• that's interesting if it is supposed to force the device to upgrade. I could tell...
• Please allow us to manage our device MAC addresses and maybe even packet size configs?...
• Get to the Network Connections list through Control Panel. Right-click on your...
• Since you seem to be answering a lot of posts, can you tell me how/were to get upgraded...
• Try this Advice...
• I'm trying to remove my network availability number via the dashboard but am having...
• no i havent messed with the wireless router
and the firmware is 3.03.6...
• I have Bell South and the transfer request went out on 28 March. Still no transfer.
Any...
• I am using xp.
Can you help me find out if dhcp is on or off.
I understand...
• ok so both computers are connected to the wrt and no computers are connected to...
• it wasn't for you, it was just general information as was the linksys link....
• My main computer is connected (by wire) to the wireless router and i have another...
• I too am having many problems with the WRTP54G dropping my phone lines requiring...
• ok, let me rephrase. how are your computers hooked up. are they plugged into the...
Select The Day You Would Like To View
• June 30, 2005
• June 29, 2005
• June 28, 2005
• June 27, 2005
• June 26, 2005
• June 25, 2005
• June 24, 2005
• June 23, 2005
• June 22, 2005
• June 21, 2005
• June 20, 2005
• June 19, 2005
• June 18, 2005
• June 17, 2005
• June 16, 2005
• June 15, 2005
• June 13, 2005
• June 12, 2005
• June 11, 2005
• June 10, 2005
• June 09, 2005
• June 08, 2005
• June 07, 2005
• June 06, 2005
• June 05, 2005
• June 04, 2005
• June 03, 2005
• June 02, 2005
• June 01, 2005
Select The Month You Would Like To View
• November, 2009
• October, 2009
• September, 2009
• August, 2009
• July, 2009
• May, 2009
• April, 2009
• March, 2009
• February, 2009
• January, 2009
• December, 2008
• November, 2008
• October, 2008
• September, 2008
• August, 2008
• July, 2008
• May, 2008
• April, 2008
• March, 2008
• February, 2008
• January, 2008
• December, 2007
• November, 2007
• October, 2007
• September, 2007
• August, 2007
• July, 2007
• May, 2007
• April, 2007
• March, 2007
• February, 2007
• January, 2007
• December, 2006
• November, 2006
• October, 2006
• September, 2006
• August, 2006
• July, 2006
• May, 2006
• April, 2006
• March, 2006
• February, 2006
• January, 2006
• December, 2005
• November, 2005
• October, 2005
• September, 2005
• August, 2005
• July, 2005
• May, 2005
• April, 2005
• March, 2005
• February, 2005
• January, 2005
• December, 2004
• November, 2004
• October, 2004
• September, 2004
• July, 2004
• May, 2004
• April, 2004
• March, 2004
• February, 2004
• January, 2004
• December, 2003
• November, 2003
• October, 2003
• September, 2003
• August, 2003
• July, 2003
• May, 2003
• April, 2003
• March, 2003
|
|
|
| |
| Vonage Service Plans |
| | |
| Vonage VoIP Members |
| | |
| Vonage Stock Price |
|
Value: 1.16
Change:  -0.04
Up to 15 Minute Delay | | | |
| Site Search |
| | |
|
|
Vonage VoIP Phone Service is redefining communications by offering consumers
& small business VoIP Internet phones, an affordable alternative to traditional phone service.
The Vonage VoIP Forum Generated This Page In: 0.59 Seconds and 131 Pages In The Last 60 Seconds
The Vonage VoIP Forum
|
Members
New 
New Today 3
Yesterday 10
Total 55093
Who Is On Site
Visitors 150
Members 3
Total 153