Search found 11 matches

Hi all,

Model Number - VT2442
Gateway - 11.4.0-r061120-1.2.1 -r1

Is it really true that forwarding on the 2442 is wholly non-functional? There are several topics of people saying, "it has trou ...

A bit of sleuthing and I found one that's pinpointed the routers with issues.

http://www.allaboutbalance.com/bbs/analysis.png

Rob

Hi Steve,

Plugged my PC directly into the 5120 to no avail - numbers are relatively unchanged. Ran 3 tests, all well over 2%.

GOOD: Having the Vonage as router next to the cable modem adds 0.2- ...

Hi Steve,

Thanks for sticking with me here!

All results are FROM me to BOSTON (vice versa is perfect).

TEST1
Round-Trip
Latency 156 ms
Packet Discards 2.7%
Packet Loss 0.0%
Loss Period ...

Hi all,

SB5120 attached directly to computer. I realize this isn't a Vonage-specific issue but this seemed to be a good place to ask.

I've got a high number of discards on the outbound and to m ...

Bumping.

Is this because nobody uses the device as a router as well?

Sounds like that's the prevailing wisdom around here. I can attest to the fact that rigging my setup with this as the router ...

Here is a line status test I ran on dslreports. The bandwidth tests pass however I have a few failures I'm not sure how to interpret.

http://www.dslreports.com/quality/nil/2050914

Rob

You say it dropped from 4.2 to 3.2 when using Vonage as the primary router, but all 3 of the tests you posted are 4.0. Please run a comparison test at www.testyourvoip.com with the NOW setup and also ...

Hey Maaz,

Sorry, no help here but I'm faced with a similar problem. Same hardware but when I switched from DSL (ATT/SBC) to Cable (Comcast) my service has gone down the tubes.

Rob

QoS - It wasn't configured but it was enabled. Disabled it in the Vonage adapter just now and the dialtone is crystal clear... let's hope it sticks. I wonder if I need to enable/configure it? Or is ...