Search found 62 matches

Just called it. The first time it took me through. I then hung up, and called again, and it now comes back and states, "there is now listing..."

Yes, also put a static IP configuration on the PAP2. This way no matter what is going on on the rest of the network, as long as the cable modem, and the hub/switch that the modem/hub/pap2 are plugged ...

You mentioned you had DHCP disabled on the WRT54GS. I think you mean you have the DHCP server portion disabled on the WRT54GS, is that correct?

If so, I think the simplest change would be to as ...

I don't have an RTP300, but I'll try to give some ideas here....

I read this as the RTP300 worked "prior" to the ISA2004 Install. You now unplugged the RTP300 and setup an ISA2004 server in i ...

Here's a link to summary sheet, [url=http://www.visiwave.com/qrvp/qrvp.php]Quick Reference For Vonage VOIP Phones , and I know there is another posted somewhere else in the fourms.

I don't know what level C.S. told you that it was blocked. I also received fast busy signals on some 800 numbers. I tested them from a POTS line like you did, called C.S. opened a ticket, they verifie ...

--------------------------------------------------------------------------------
I have came up with a couple of ASP pages, one client side, one server side, that work with the click2callu service. T ...

Did you originally have your router setup to forward the port? If so and you've now statically assigned your IP address you may need to go into your router setup and forward the appropriate ports to t ...

You should be able to fix this yourself, I had the same issue.just log into your www.vonage.com acocunts web interface and change the time zone to a different setting, wait 5 minutes, then change it b ...

I just called into Tech Support, took less than 5 minutes on hold after navigating through the phone menus. I told them I'd like to have the firmware updated, he flagged the account. I powered the PAP ...