Search found 15 matches

Vonage has to emulate the DTMF tones you would normally get passed straight over POTS. Because of this, some people's voices can occasionally be detected as you or them pressing a button and so Vonage ...

Hi all -
I've recently been getting this wired problem:
In the middle of a conversation it sounds as though the other end is pushing a key on their touch tone phone. The other end does not hear i ...

I'm in the process of starting a small business and was thinking of adding a $9.99 fax line to my vonage account. Is there anything stopping me from using it as a voice line instead of a fax line?

I had this problem with both a Motorola VT1005 and the RTP300.
Rolling back the firmware to .55 helped a great deal, but it still happens on my line on occasion.

yeah a bad phone port is a l ...

My experience is different:
Though I was on the phone with a Tech for 2 1/2 hours, he did manage to tweak my settings so that most of the hiss and echoing have gone away.
Other issues truly are ...

UPDATE:

Vonage confirmed that there is a switch down for the inbound calling issues.

But all incoming calls were very staticy.

After being on the phone w/ vonage for 2 hours, the tech (ve ...

This happens to us on occasion

MOS 4.4 / 5.0
(Best with G.711 is 4.4)

Degradation Sources
Codec 0.58 93.0%
Latency 0.00 0.0%
Packet Discards 0.04 7.0%
Packet Loss 0.00 ...

Sadly, my incoming callers are calling me on my cell phone telling me they either get a message that "all circuits are busy", or simply do not connect when they call my Vonage #.
At other tim ...

I've been reading this forum for a few weeks now, and was wondering if I set up my Vonage adapter correctly.
Vonage first sent me a Motorola VT1005, which is supposed to be wired as follows:
Inter ...

17 business days in Falls Chruch, VA. Ported from Verizon.

November 15, 2005 Awaiting Letter of Authorization
November 22, 2005 Letter of Authorization (LOA) Received
November 22, 2005 ...