| Author |
Message |
| Topic: Vonage with Kayako supportsuite |
miharu
Replies: 1
Views: 367
|
Forum: Vonage Forum Archive
Posted: Mon Feb 19, 2007 10:21 pm Subject: Hi anyone one knows how to set up the vonage softphone with Supportsuite by kayako? |
| Hi anyone one knows how to set up the vonage softphone with Supportsuite by kayako? does it have to do with SIP messages? |
| Topic: No dial tone for 3 days! |
miharu
Replies: 13
Views: 1126
|
Forum: Vonage Forum Archive
Posted: Mon Jan 08, 2007 6:59 am Subject: just to make sure.. your setup should be
comcast modem going to the internet |
just to make sure.. your setup should be
comcast modem going to the internet port of you vonage router.. then from the ethernet port of your vonage to your computer.
then, power cycle all d ... |
| Topic: No Dialtone in China |
miharu
Replies: 40
Views: 2876
|
Forum: Vonage Forum Archive
Posted: Sun Jan 07, 2007 2:32 am Subject: since you're using adsl most likely the protocol your using is PPoA w/c would not |
since you're using adsl most likely the protocol your using is PPoA w/c would not work for vonage device (pppoe)
connect pc to your modem, run ip config, see if its getting a public or private ip ... |
| Topic: Customer Service |
miharu
Replies: 3
Views: 318
|
Forum: Vonage Forum Archive
Posted: Fri Dec 22, 2006 10:43 pm Subject: yup joe_izuzu is right, theres an ongoing issue with incoming calls earlier |
| yup joe_izuzu is right, theres an ongoing issue with incoming calls earlier |
| Topic: Outage? |
miharu
Replies: 41
Views: 2498
|
Forum: Vonage Forum Archive
Posted: Fri Dec 22, 2006 10:39 pm Subject: if this is happening there could be an ongoing issue with vonage, I suggest try |
| if this is happening there could be an ongoing issue with vonage, I suggest try to move the number to another phone port on your web account and reboot all devices,that may do the trick (in some cases ... |
| Topic: Motorola VT2142 not working with BSNL 256kbps ADSL connectin |
miharu
Replies: 19
Views: 6218
|
Forum: Vonage Forum Archive
Posted: Fri Dec 22, 2006 10:37 pm Subject: Hmmm I'm not really sure if the modem you are using has a built it router in it, you |
| Hmmm I'm not really sure if the modem you are using has a built it router in it, you said you're using ADSL connection, if you really are using adsl configuration, then it means you're using PPPoA (no ... |
| Topic: Ethernet/ usb converter |
miharu
Replies: 1
Views: 1288
|
Forum: Vonage UK
Posted: Sat Oct 21, 2006 7:38 am Subject: i am trying to install the vonage [rt31p2 router] with my SAGEM FAST 800 E3 MODEM, |
| i am trying to install the vonage [rt31p2 router] with my SAGEM FAST 800 E3 MODEM, unfortunately the modem i have uses usb for my pc.. so i thought i need to buy a router i bought a dlink dsl -320T ro ... |
| Topic: USB modem with my vt2442 |
miharu
Replies: 3
Views: 723
|
Forum: Vonage UK
Posted: Thu Sep 21, 2006 5:17 am Subject: i already did the setup in the vonage website for usb modems (vonage.co.uk/freetalk) |
| i already did the setup in the vonage website for usb modems (vonage.co.uk/freetalk) and its stuck on 2 blinks well i guess my last resort would be buying an ethernet modem, thanks for the help guys! |
| Topic: USB modem with my vt2442 |
miharu
Replies: 3
Views: 723
|
Forum: Vonage UK
Posted: Thu Sep 21, 2006 1:59 am Subject: hi guys, my sister used to have freetalk.. and her setup would be
BT westell |
hi guys, my sister used to have freetalk.. and her setup would be
BT westell adsl modem 36r305>>(usb) pc>> vt2442. this was the setup the tech supprot gave us and instruct us to go t c ... |
| Topic: Suggestions for a new adsl2 modem for Motorolla vt 2442 |
miharu
Replies: 17
Views: 2827
|
Forum: Vonage UK
Posted: Thu Sep 21, 2006 1:28 am Subject: it was flashing and then after a couple of minutes it turned red, thanks for the |
| it was flashing and then after a couple of minutes it turned red, thanks for the reply, i'll try to change the ip address of the vt2442 |
| |