Search found 46 matches

I would have considering they have had a good record with me until they gave me a firmware upgrade on a RT31P2 and destroyed two caller ID units so now I received a new router, RTP300 and everything w ...

Ranting about it sometimes make you feel better but we are not going to be able to help out much unless you give us some information on your equipment and how you have it hooked up.
Start with:
IS ...

I had a weird incoming ring but that turned out to be the firmware fer. 1.29. It also destroyed two caller ID units.

But then I get fer 1.30 and yes I have the outgoing ring that is now weird as ...

I just installed my new caller ID unit and that is what it was because now it is working...

Thanks to all who replied, the help was appreciated....

VONAGE ROCKS!!!

Well I just came back from doing some tower/antenna work and got the forum email and saw that you have the 1.30/3.1.6(LI) so I just checked mine and found that I now am up to the 1.30/3.1.6(LI) too.
...

Well they did push me back to 1.28 but this morning I checked it and they pushed it back to 1.29 and I have lost the weird ringing. So I am thinking that some of the first update failed.
I replaced ...

Where I come from I have Charter Communications as my cable carrier. They are good about keeping the signal levels proper and they don't like to use drop amplifiers, they are expensive and as someone ...

Well a wait of about 2 rings and CS was on the line and the gentleman put my router back to 1.28. With that I lost the weird ringing but I still don't have caller ID. He then went on to change some se ...

Since I noticed the firmware upgrade my phones have a weird ring.
There is a full ring then the next ring is a half ring then another half ring and then maybe a full ring on every incoming call.
T ...

I have had this issue happen twice to me.
You need to call CS and have them change it.There isn't anything outside of that you can do to change the time display on your Caller ID unit.