Search found 23 matches

take the bandwidth test, and post your results.

also.. any chance of ditching the motorola and getting a pap2?
They're only running around $50...

not if DHCP is enabled on the box.
If it is, it will obtain an IP address from the DHCP server.

At what IP?
The IP address my DHCP server assigned to the PAP2.

if it's a pap2v2 you can set a static ip on your pc and connect directly to the p2v2 at the gateway ip.

I already have it assign ...

See I didn't know that my FTP server gets assigned an IP address. I guess I'm just not completely informed about what and FTP server is! Embarassed

So in my mind, the internal IP address of the FTP serv ...

Makes sense.
The only time I was able to access the web config page was prior to connecting..
It's a real shame. All the bits that vonage could possibly care about (i.e., the menus that allow you t ...

I would suggest completly turning NAT and DHCP off on the VT2442. Turn DHCP and NAT ON on the linksys. The VT2442 now esentially turns into an access point (i.e., a switch).
that's exactly what ...

Does the linksys have ethernet ports? If so, why not just use the linksys as your router? You don't need routing functions on the VOIP box (the PAP 2, for example, has no routing functions).

I wou ...

no... says web page not found.. which seems to indicate to me that the web server in the box is disabled, or just not accepting traffic.

1) Get rid of the linksys router.
2) If you disable nat/dhcp on the linksys, make SURE that all your clients point to your motorola as the gateway and as the dhcp server
3) IF you configured port ...

It sounds like it may have been assigned a different IP address. Can you go into the DHCP routing table and see what's the IP is?

No, I got the ip address correct.. It's tied by its mac address to ...