Search found 29 matches

Matt,

Thanks for the info. I was running my wireless router on channel 3. I have since changed to it channel 1.

I did, however, replace my cheap GE 2.4ghz phones with a Uniden 5.8ghz mult-handse ...

Didn't really consider that. Yes, I do have a wireless network in my home too (Linksys WRT54G) and I occasionally drop my wireless connection when the phone is answered. However, I tried a test tonigh ...

Hi.

I have a problem that has me perplexed.

I have had Vonage in my home connected to my home wiring for over two years. I have been, for the most part, very happy with the service.

About six ...

In Wilmington, DE. Can't receive calls... you hear three short beeps when calling. Cell phone says "Unassigned Number". Can place calls just fine.

Tried forwarding my number to a cell phone but it ...

ironmike,

Before slamming Vonage can you please post your hardware configuration and the results of VoIP bandwidth tests described earlier in this thread.

http://www.vonage-forum.com/voip-speed- ...

Exxtreme, I would check your setup (especially router/firewall). The problems report here last month were intermittent, and impossible to narrow down.

Since I started this thread, I feel that I should post an update. Ever since Comcast replaced my modem with an RCA DCM425 2-3 weeks ago, I can only think of one instance where I had the one-way audio ...

Down in Wilmington, DE.

Can't log into the website.
Can't call home (where my Vonage connection is).

Haven't tried calling from home but I imagine that it doesn't work also.

Cry

Running out of ideas, I decided to call Comcast tech support yesterday and actually got a fairly knowledgeable Level 1 tech (!). I explained my problem to him and asked if I could swap out my (rented) ...

OK, after nearly a week without problems, the dreaded one-way audio problem was back today, and only for outgoing calls. It's fixed always by resetting my PAP2 adapter. Sad

If this is a known is ...