Search found 12 matches

i have tried callclerk in the past which is client/server. but it is too slow (client pc's don't get notified until the 3rd ring or so). and i don't get names, just the number (i get the number agai ...

Well I'm going to replace my current BEFSR41 with a WRT54GS even though I don't need wireless at this time, because of the QOS features and the SPI firewall, the cool stuff you can add with third part ...

thanks again.

one question i had, which i looked around for and didn't really get a solid answer...if i went with the WRT54GS, would you know if all the cool additions like VPN server, etc. in the ...

thank you for that informative post. i think i will purchase one of those guys.

I'm guessing my problems with the choppy audio come from the addition of SPI to the more recent linksys firmware upgrades for the BEFSR41? Maybe I didn't go back far enough with the firmware "down"gr ...

I'm having the same problem with my BEFSR41, after upgrading the firmware to the latest one. For me, the cable modem looks fine when the connection drops sporadically for short periods of time. I'm ...

well if no one's used it with vonage, anyone have other recommendations on a good router to put in front of the linksys phone adapters?

I currently have two of the older linksys vonage adapters and a bunch of PC's behind a Linksys BEFSR41 V1 router that I've had since 2001. Everything was working acceptably (needed resets once a mont ...

I have two linksys phone adapters and 3 vonage numbers. I'm thinking about moving some stuff around in the house. Is it possible to swap a number from the first adapter with a number on the second a ...

I have a d135 and I had to call vonage about problems with faxing, they walked me through how to go into a special menu and change the baud rate to 9600 on the machine. with a 2 conductor line and th ...