Search found 19 matches

Do you have UPnP enabled? This feature was added in 1.4 but I think it is disabled by default.

Check this out:

http://support.dlink.com/SupportFAQ/default.asp?model=DGL%2D4300

Look at the Ge ...

I saw a similar thing. If I have it set to a static IP, then go to change to another static IP, the settings aren't saved. Actually, when you try and reboot it, it never gives you the friendly messagi ...

Here is a link to the post. Basically it involves some testing which should help in diagnosing your problem.

[url=http://www.vonage-forum.com/ftopic7191.html]http://www.vonage-forum.com/ftopic7191. ...

Ged,

This is what I have been trying to track down in a couple threads but so far have come up empty. I don't understand why inbound differs from outbound calls; I have a similar issue. Outbound ...

Yeah I did do some heavy troubleshooting on that one. To be honest, there is a good deal of jitter on my line. I have been back and forth with the cable co but really getting no where. I see the times ...

That's an excellent idea! Smile

Actually I did that -- just not enough time yet to see if it helps.

Thanks a ton (both of you!).

In my continued troubleshooting of my on-way issue, I traced back the changes that I made to my setup. I listed two things:

1. put a splitter out of the pap2 so I could have one wired phone and one ...

Anyone know what the difference is between inbound and outbound? Why inbound would always be perfect but outbound poor? I posted this in another thread "On way calls". I was curious if it has to-do wi ...

It looks like you have a good deal of packet discards which is similar to what I am seeing.

You noted in your subject that you are having outbound issues, so inbound is ok? Reason I ask is that I a ...

Well I am saddened (wait, frustrated!) to say, now my one-way calls happen on both ends. Last night, a few calls I couldn't hear the other person.

This is so strange.

One more question if anyone ...