Search found 93 matches

if all the lights are solid, the only thing i know is that, it either have an outdated firmware, or you need to hard reset it because it might suffered from a power surge. also try to unplug it for a ...

just have them replace it because i belive it shouldn't have any issue

sorry for the typo, yup LAN from the netgear then WAN to the rt. thanx paul

i believe you bought the wrtp for wireless connection right. just connect it to your modem then connect the pap2 to it

just connect the Internet port of the rt to the netgear and you'll be all set. just want to tell you that if you're using a 2.4GHz cordless phone, you might have interference problem, that is if your ...

i believe it is normal for a router to reboot to acquire a dns server address if it is not getting one

are you using firmware 2.38 on your di-784? try to do an upgrade. make sure you hard reset the device first before upgrading

try a different phone or try a different phone cable, just to eliminate the possible sources of the problem

i believe this is the better setup:

modem>wireless router>rt31p2

connect 1 of the LAN port of your wireless router to the LAN port of the rt31p2. you don't need to set it up in dmz, just f ...

do a speedtest, go to speedtest.voange.com, tell me your upload speed