| Author |
Message |
| Topic: Preferred Broadband Service |
almahix
Replies: 1
Views: 104
|
Forum: Vonage
Posted: Wed Jun 17, 2009 4:51 pm Subject: Early on (2004) I had Vonage with TimeWarner cable, and had no end of problems. |
Early on (2004) I had Vonage with TimeWarner cable, and had no end of problems. At the same time a fiend of mine had AT&T DSL and never experienced problems.
Presently I have Verizon FIOS and m ... |
| Topic: Verizon FIOS will not connect directly to Vonage box |
almahix
Replies: 6
Views: 310
|
Forum: Vonage
Posted: Tue Jun 09, 2009 10:55 pm Subject: You cannot remove the router and reconnect your PC to the FIOS ONT without releasing |
You cannot remove the router and reconnect your PC to the FIOS ONT without releasing the ip address on the router before disconnection and renew the ip address on the pc after connecting it.
I don' ... |
| Topic: Voicemail Inboxes (i.e. Press 1 for X, Press 2 for Y) |
almahix
Replies: 2
Views: 213
|
Forum: Vonage
Posted: Tue Jun 02, 2009 7:30 pm Subject: If Vonage isn't capable of doing what you want, and you don't want to bother with |
| If Vonage isn't capable of doing what you want, and you don't want to bother with an Asterisk type of solution, look into ringcentral.com. You can use it with Vonage lines or telco lines. They host i ... |
| Topic: Vonage Speed Test |
almahix
Replies: 3
Views: 647
|
Forum: Vonage
Posted: Sat May 16, 2009 6:18 pm Subject: What happened to the guy who used to run this place? |
| What happened to the guy who used to run this place? |
| Topic: Cannot connect to vonage router settings page |
almahix
Replies: 8
Views: 319
|
Forum: Vonage
Posted: Thu Mar 05, 2009 8:38 pm Subject: Subnet mask on my router is class c. I tried to connect to the V-Portal wan ip address |
No it can't. Is the subnet mask on your D-Link 255.255.0.0 or 255.255.255.0
If it is a B class, change it to a C Class (255.255.0.0 to 255.255.255.0) or do the following.
Change the LAN IP of t ... |
| Topic: Cannot connect to vonage router settings page |
almahix
Replies: 8
Views: 319
|
Forum: Vonage
Posted: Thu Mar 05, 2009 8:09 pm Subject: Well, I tried that but it didn't seem to work out. I enabled remote admin on the V-Portal |
Yes. You can access it via it's WAN port after you have logged into it via the LAN port and enabled Remote Administration.
Assuming your connecting the WAN port of the VDV21 to a free Ethernet port ... |
| Topic: Cannot connect to vonage router settings page |
almahix
Replies: 8
Views: 319
|
Forum: Vonage
Posted: Sun Mar 01, 2009 9:37 pm Subject: Can you access the vonage device through its LAN port and disable its DHCP then |
In order to log into the Vonage device at IP 192.168.15.1, you must have a PC connected to a LAN port on the Vonage router and your PC must obtain an IP of 192.168.15.x.
If your trying to reach 192 ... |
| Topic: What's wrong with Simul-Ring? |
almahix
Replies: 4
Views: 244
|
Forum: Vonage
Posted: Wed Nov 05, 2008 8:35 pm Subject: I've received several simulring calls yesterday and today at my office from my |
I've received several simulring calls yesterday and today at my office from my home number, and they also show up as missed calls on my cell phone. I'd say it is working fine.
I have had a problem ... |
| Topic: Combine 2 phone lines into 1 port - Multi-line 2 port phone |
almahix
Replies: 7
Views: 2257
|
Forum: Hard Wiring - Installation
Posted: Wed Sep 10, 2008 8:33 pm Subject: I used a 2-wire cable to the wall outlet (Verizon) and a 2-wire cable to the Vonage |
Hmm. It should have worked. What went wrong?
Were the patch cords that you used to connect the house wiring to L1 on the adapter and to connect the Vonage box to L2 on the adapter nice expensiv ... |
| Topic: Combine 2 phone lines into 1 port - Multi-line 2 port phone |
almahix
Replies: 7
Views: 2257
|
Forum: Hard Wiring - Installation
Posted: Wed Sep 10, 2008 6:53 pm Subject: Thanks for your response. Unfortunately, this scheme of mine did not work. I'm |
Yes, what you describe should work fine.
Thanks for your response. Unfortunately, this scheme of mine did not work. I'm back to two long wires. |
| |
Vonage® VoIP Forum - Vonage News, Reviews And Discussion
Goto page 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 Next
|