| Author |
Message |
| Topic: rt31p2, phone 1 light always on, no dial tone |
alanbeth
Replies: 1
Views: 1046
|
 Forum: Vonage Forum Archive
Posted: Sun Aug 21, 2005 10:30 am Subject: I am helping a fellow Vonage user who also has the rt31p2 adapter. Apparently this |
| I am helping a fellow Vonage user who also has the rt31p2 adapter. Apparently this was working fine until one of the phone ports stopped working. They plugged their phone into the other port and it ... |
| Topic: Phone lights blinking and no dial tone |
alanbeth
Replies: 5
Views: 1308
|
Forum: Vonage Forum Archive
Posted: Mon May 16, 2005 9:29 pm Subject: My first Vonage RT31P2 had a similar sounding problem. Both phone lights blinked |
| My first Vonage RT31P2 had a similar sounding problem. Both phone lights blinked in unison every few seconds. Router still worked. No dial tone. However, this was during initial setup. It hadn't ... |
| Topic: Billing error, acknowledged but unfixed, affects 500 min.pln |
alanbeth
Replies: 4
Views: 1122
|
Forum: Vonage Forum Archive
Posted: Sat May 14, 2005 9:03 pm Subject: Thanks to both of you for your accurate responses. This makes sense concerning |
Thanks to both of you for your accurate responses. This makes sense concerning the GMT.
It would seem to me that it wouldn't be a difficult thing for the Vonage online account system to give use ... |
| Topic: Billing error, acknowledged but unfixed, affects 500 min.pln |
alanbeth
Replies: 4
Views: 1122
|
Forum: Vonage Forum Archive
Posted: Sat May 14, 2005 3:26 pm Subject: My last billing cycle ended on May 13th and my current billing cycle began on May |
| My last billing cycle ended on May 13th and my current billing cycle began on May 14th. On May 13th, I made a 98 minute call that ended at 10:20pm local time (CDT). While my account information plac ... |
| Topic: Linksys RT31P2, no dial tone, both phone lights blinking |
alanbeth
Replies: 8
Views: 3323
|
Forum: Vonage Forum Archive
Posted: Tue Mar 15, 2005 7:08 pm Subject: Appreciate your help...might be one link in solving the problem. Any other ideas |
| interesting. not too bad, and definitely not what I was expecting. not being able to connect to that server though, is your problem. (you may have other problems, but that's the first hurdle) not sure ... |
| Topic: Linksys RT31P2, no dial tone, both phone lights blinking |
alanbeth
Replies: 8
Views: 3323
|
Forum: Vonage Forum Archive
Posted: Tue Mar 15, 2005 6:45 pm Subject: I ran the trace twice. This is the first set of results. The second one is still running, |
| it looks like you've never connected to the vonage servers (firmware) and that for some reason, you can't. I've never seen anyone have a timeout, so I'm guessing you have very high pings, and possibly ... |
| Topic: Linksys RT31P2, no dial tone, both phone lights blinking |
alanbeth
Replies: 8
Views: 3323
|
Forum: Vonage Forum Archive
Posted: Tue Mar 15, 2005 6:37 pm Subject: Mexico...my ISP here is Cablered/Cablemas.
Well, that's a good question. |
Mexico...my ISP here is Cablered/Cablemas.
The most important part on the last line...
What is your quoted speed and what is your true speed?
Well, that's a good question. My contract with ... |
| Topic: Linksys RT31P2, no dial tone, both phone lights blinking |
alanbeth
Replies: 8
Views: 3323
|
Forum: Vonage Forum Archive
Posted: Tue Mar 15, 2005 6:23 pm Subject: Firmware is 1.25.00 (I've never figured out how to upgrade it nor whether I should)
Tried |
what firmware version do you have when you go into the setup.
what happens with this (from a command prompt):
tftp tftp.vonage.net get test
Firmware is 1.25.00 (I've never figured out how to upgr ... |
| Topic: Linksys RT31P2, no dial tone, both phone lights blinking |
alanbeth
Replies: 8
Views: 3323
|
Forum: Vonage Forum Archive
Posted: Tue Mar 15, 2005 6:04 pm Subject: Another newbie here...I've followed all the Linksys and Vonage directions for |
Another newbie here...I've followed all the Linksys and Vonage directions for installing this router/adapter (Linksys RT31P2).
It powers up nicely. Power light is solid. Ethernet 1 light is s ... |
| |
Members
New 
New Today 0
Yesterday 3
Total 64297
Who Is On Site
Visitors 76
Members 0
Total 76
-0.03