Search found 13 matches

I may have to pick one up...is there an alert for each line? can you choose which line to dial out on?

yes to both questions. independent ringers and line buttons.

I got the Uniden TRU8866 today. 2 lines and all the featues you could want minus the the answering machine. Sounds great, message waiting and caller id both work fine.

2 jacks on the back. 1 RJ ...

Ignore the missing yellow light. It means only that the uplink/wan port on the router is only 10mb instead of 100mb. Not an issue unless your service provides more than 10mb throughput.

Connect ...

Try this link....

http://www.vonage-forum.com/home-wiring-installation-guide.html

Are you sure your office doesn't have Line 1? From your description, the only cable that has line 2 on it (which you say only appears on the office) also has line 1. Based on the wiring descriptio ...

We have two numbers on our account. When I launch the C2C dial window the wrong one shows up by default. I tried changing to the other one and clicking on "Default" button but this doesn't seem to w ...

I dont think I need QOS, but it cant hurt.
Im using a linksys WRT54G router with the Sveasoft firmware.
Speeds are 9500/950 (Cablevision OOL)
but I may go back to DSL (1500/384) so I want to make s ...

I agree with RemyJ for the static IP but turning off the DHCP/NAT feature on the MTA will prove alot of problems.

Are you saying that NOT using the MTA's DHCP and NAT causes problems? My dire ...

First, have you verified you actually NEED QoS in the first place?
What are your downlonk/uplink speeds and what router are you using?

In general it's probably easier to raise the priority on port ...

If you assign a static IP address to your computer in the 192.168.102.0 subnet, you should still be able to get to the web interface from the LAN port. Even in pass-through mode.

Once there, you c ...