Search found 17 matches

It's not officially called a router, but it does do NAT and acts as a DHCP server on the 192.168.102.x range - yes all available addresses in that range. Because of NAT, the unit is a nice little fir ...

Remember, your router probably assigns addresses to your PC's in a different network address range than the Motorola such as 192.168.1.xxx You will then have to assign yourself a static IP address in ...

I have the same problem. By changing phones to one that doesn't need a power supply solved my problem.
The problem could be caused by any device in your network that has a AC to DC power supply inc ...

I have no problems faxing with my Brother Intellifax 1575 MC. It has worked great except one time with Vonage and the Motorola VT1005v (1 line only -no dedicated FAX line) with good fax quality an no ...

384 up and 1.5 down is more than enough for browsing and a VoIP call at the same time. Possibly, there is a bottleneck to and from the sites you are visiting or the other ends connection is slow??? ...

Students at IIT in Chicago recently completed labs with call tracing using Ethereal. The .ppt presentation has a section on the call setup and teardown process. See: http://ewh.ieee.org/r4/chicago/ ...

I use the Linksys BEFSR41 4 port router with all ports being used and another switch on 1 of the lines to add 2 more ports. VoIP with Vonage has worked great with this router. No port forwarding is ...

I have no problems faxing with my Brother Intellifax 1575 MC. It works great every time with Vonage and the Motorola VT1005v (1 line only) with good fax quality an no adjustments made to the fax mach ...

Moto, what if he turns off DHCP/NAT on the Moto to put it in pass-through mode?

KrautDog

du1jec, Thanks for the info. I will be getting a few Pulver phones soon along with the BroadVoice service for testing their QoS as compared to Vonage. I will check to see if those Pulver phones ...