Search found 10 matches

If you plug a phone into the out port on the TH48 and get dial tone then purchase a common ethernet punch panel. Take a cat5e wire and slice it open and remove the blue wire pair. Punch this pair do ...

I have had two clients in as many weeks that have had 15 to 20 lines installed in a business environment. I understand the bandwith requirements for both upload and download speed as well as the conc ...

You'd probably need a crossover cable to connect the pc directly to the HBB1 and access it. I don't know that you'd be able to access it anyway though. I think the admin interface remains inactive u ...

Shutdown pc, unplug router, unplug cable modem, unplug ata. Connect INTERNET port of HBB1 to cable modem. Connect ROUTER port of HBB1 to WAN port of router. Power up modem and allow to sync. Power ...

The HBB1 is a great device. Do you have all ports properly forwarded and allowed through any firewall that may be present between the vonage device and internet?

EXCELLENT! I purchased mine from Newegg on 4/8 for 24.99 with free shipping. Glad I saved the box now too. Thanks for posting this.

I don't ever buy all-in-one devices unless I can't avoid it. The firmware is always less than poor. I use a wired router, wireless access point and the d-link vta. As long as I have electricity and ...

Do you just call them and tell them you want to use the new ata on your existing line?

thanks

No need to call even. Just logon to Vonage and under Addons you can move a number to another devic ...

^ Thx but you misunderstood me - it's *my* computer's IP which is 20.0.01. The 2142's IP is 192.168.0.1

Then set the pc with a static address of something available between 192.168.0.2 and 254 with ...

If the static IP of the 2142 is set to 20.0.0.1 then to access it you must set your pc with a static address within the same range. Try setting your pc as 20.0.0.2 with a subnet mask of 255.0.0.0.