Vonage  

       
 
Vonage Forum Menu

Vonage Forums
Vonage VoIP Forum
VonTechMgr Posted:
By design, port
forwarding only
allows you to
forward a port
number or port
range
...

In The Forum:
Vonage
Topic:
Vonage adaptor, LinkSys router and Remote Desktop Connection
On Nov 08, 2009 at 02:47:17

doc55 Posted:
One more question.
I setup the RDC on
my PC with inrnal
IP of
192.168.1.XYZ and
it
...

In The Forum:
Vonage
Topic:
Vonage adaptor, LinkSys router and Remote Desktop Connection
On Nov 08, 2009 at 02:33:59

doc55 Posted:
EXCELLENT. That
did the trick and
it is working
perfect. Thank
again.
...

In The Forum:
Vonage
Topic:
Vonage adaptor, LinkSys router and Remote Desktop Connection
On Nov 07, 2009 at 17:13:04

VonTechMgr Posted:
Look at your Port
Forwarding rule in
the V-Portal. The
IP is 192.168.15.0
A
...

In The Forum:
Vonage
Topic:
Vonage adaptor, LinkSys router and Remote Desktop Connection
On Nov 07, 2009 at 17:00:33

doc55 Posted:
I'm sorry but I'm
not a network
savvy person. You
mentioned about
WAN port in my
...

In The Forum:
Vonage
Topic:
Vonage adaptor, LinkSys router and Remote Desktop Connection
On Nov 07, 2009 at 16:38:25

VonTechMgr Posted:
Yes you can just
use the Netgear as
a WAP by going
from Linksys LAN
to Netgear LAN.
...

In The Forum:
Vonage
Topic:
Trying to use Netgear WGT624v3 as WAP with Linksys RT31P2
On Nov 07, 2009 at 15:39:57

jameshodgins Posted:
And if this setup
is too cumbersome,
what is the best
way to set up
wireless home
...

In The Forum:
Vonage
Topic:
Trying to use Netgear WGT624v3 as WAP with Linksys RT31P2
On Nov 07, 2009 at 14:59:37

jameshodgins Posted:
Ok, so you are
saying that I can
plug a laptop into
a lan port on the
netgear, configure
...

In The Forum:
Vonage
Topic:
Trying to use Netgear WGT624v3 as WAP with Linksys RT31P2
On Nov 07, 2009 at 14:58:45

VonTechMgr Posted:
If your saying you
connected one of
the LAN ports of
the RT31P2 to a
LAN port on the
...

In The Forum:
Vonage
Topic:
Trying to use Netgear WGT624v3 as WAP with Linksys RT31P2
On Nov 07, 2009 at 14:49:05

VonTechMgr Posted:
1) When you logged
into the V-Portal
and configured
port forwarding,
to what IP
...

In The Forum:
Vonage
Topic:
Vonage adaptor, LinkSys router and Remote Desktop Connection
On Nov 07, 2009 at 14:41:49


Vonage VoIP Forums

Vonage In The News
Vonage VoIP Forum Digest - July 24, 2008

Vonage Holdings Corp. Signs Commitment Letter to Refinance Debt

Syndication

Vonage User Reviews
Great Price, No Complaints
Great Price, No Complaints



Good return on investment for techie!
Good return on investment for techie!



You need some common sense.
You need some common sense.



3 yrs and counting, useful but complaints as follows
3 yrs and counting, useful but complaints as follows



Vonage, a VT2142 and a RTP300, My Experiences - A Detailed Review
Vonage, a VT2142 and a RTP300, My Experiences - A Detailed Review




Vonage Reviews

Vonage To Celeron (or EzCo), Just curios, I am getting ready to take my ccna so all



To Celeron (or EzCo), Just curios, I am getting ready to take my ccna so all of the router commands and setup is familiar to me. You will have to excuse my ignorance as far as VOIP technology as this is fairly new to me. I just wanted to know, in your topology you list "vonage phone adapter" - Is this a phone adapter without routing capabilities such as the "VTech IP8100" or is it a router with the phone adapter built in such as the "RTP 300"? It seems that if you went with a Cisco Router (with one WAN Ethernet port and one LAN Ethernet port)then right to another router, a little redundant and if you have a Cisco Router I would think that you would put a switch underneath it. In which case (if you use a phone adapter) brings me to the question that I am really curious about, is the phone adapter "smart" enough to listen for packets between 10000 and 20000 or do you need to forward those to a specific network address/switch port and/or mac address in the router (or switch)? I am trying to wrap my mind around this and if this is the wrong post to ask this question or if you could lead me to a page where I could find more info on VOIP with cisco routers I would be grateful. Thanks for your help. Punk.



Read The Full Thread:

Cisco VOIP QoS for Vonage


Hi everyone, I'm posting this in hopes that it will help others configure
How do you tell whether or not the QoS is actually working? Simply enter the command
Just to let you know this post was a huge help to me. Thank you very much for taking
Good stuff. That's a pretty standard config, but let me share a slightly different
Doesn't matter what is behind the Cisco, it's just going to (outbound) priority
So there's no way to do this without trying to match your upload speed? Is there
No, you really have to make sure you enable shaping because the key point of QoS
They are stacked and connected with two DTE/DCE cables right now. I put your example
Class-map: class-default (match-any) 905660 packets, 369453629 bytes

PunkMunk posted "To Celeron (or EzCo), Just curios, I am getting ready to take my ccna so all" on 03/31/2006

Vonage Service Plans




Vonage VoIP Members
Members List Members
New talha25
New Today 0
Yesterday 4
Total 54976

Who Is On Site
Visitors 112
Members 0
Total 112


Vonage VoIP Forum Members:
Login Here
Not a Member? You can Register Here
As a registered member you will have access to the VoIP Speed Test, Vonage Service Announcements and post comments in the
Vonage VoIP Forums

Vonage Stock Price
Value: 1.28
Change:   -0.07
Up to 15 Minute Delay

Site Search
 




www.vonage-forum.com is not an official Vonage support website & is independently operated.
All logos and trademarks are property of their respective owners. All comments are property of their posters.
All other www.vonage-forum.com content is © Copyright 2002 - 2008 by 4Sight Media LLC.

Thinking of signing up for Vonage but have questions?
Business and Residential customers can call Toll Free 24 hours a day at: 1-888-692-8074
No Vonage Promotional Codes or Coupon Codes are required at www.vonage.com.

[ | | | | | ]

Vonage Forum Site Maps

Vonage | Vonage UK Sign Up Offer | VoIP Forum | How VoIP Works | Wiring and Installation Page Two | Internet Phone
Promotion | Vonage Review | VoIP | Broadband Phone | Free Month | VoIP | Phone Service | Rebate | Encyclo
Phone | Latest News | Canada Free Month Sign Up Offer | VoIP Acronyms | Vonnage | Vontage | Deal | Site Maps

The Vonage Forum provides the Vonage Free Month sign up Best Offer Promotion Deal as a means to offset our cost.
If you are considering signing up for Vonage and have found our Vonage News, Customer Reviews, Forums
& all other parts of this site useful, please use our Vonage Free Month sign up offer Deal Coupon.


Vonage VoIP Phone Service is redefining communications by offering consumers
& small business VoIP Internet phones, an affordable alternative to traditional phone service.
The Vonage VoIP Forum Generated This Page In: 0.43 Seconds and 103 Pages In The Last 60 Seconds
The Vonage VoIP Forum