 |
 | Vonage Forum Menu |
| | |
| Vonage Forums |
|
|
| | | |
| Vonage In The News |
| | |
| Vonage Customer Reviews |
| | |
| |
Vonage Things have been working fine since mid-July 05 when I purchased the WRTP54G and
Things have been working fine since mid-July 05 when I purchased the WRTP54G and signed on to Vonage. Even recently when lots of folks were complaining about CID - I had no problems.
Then sometime Thursday - I got updated to 1.00.55 and things went you know where in the proverbial handbasket.
Incoming calls come in but we almost never have a dial tone when trying to initiate a call. After repowering the WRTP54G, we will have a dial tone. But after making one call and hanging up the dial tone is gone again.
Also, when someone calls in, the first several seconds of their talking is cut off - we don't hear it. And CID is now hit or miss. All this started with the 1.00.55 upgrade.
Called tech support - after much checking back with someone else he told me to disable NAT/Firewall. I objected - saying I didn't want to run that way and had not had to run that way before 1.00.55. But getting no other help, I decided to try to disable NAT.
Well, guess what - with NAT disabled the entire router function is out to lunch!! I can still see the WRTP54G and my cable modem, but can not connect anywhere on the Web. So that was a very short experiment.
Any one else experiencing this problem and anybody have any suggestions? I am going to wear out the DC power connector on the WRTP54G at this rate!!
Read The Full Thread: No Dial Tone after 1.00.55 - WRTP54G
• Disabling NAT was a very bad suggestion!
Have you reset EVERYTHING? (start
• I was away on business and my wife complained that our phones were acting "wacky"
• Vonager - thanks for the suggestion. I have been through the shutdown sequence
• Jorn,
1.00.55 was automatically downloaded to me sometime Thursday. It
• HI,
I agree with u. exactly same problems for me .... Ver 1.00.55 is the culprit
• 1.00.50 was somewhat stable. Then .52 introduced some odd, random issues (mostly
• I also have the latest firmware of course mine came in automatically. I have done
• Level 2 changed the phone port to number 2 and then the phone started to work like
• Guys,
I WAS talking to vonage tech support - level 2 ( after wasting 1 hour with
billgrayny posted "Things have been working fine since mid-July 05 when I purchased the WRTP54G and" on 11/05/2005 |
|
|
| |
| Vonage Service Plans |
| | |
| Vonage VoIP Members |
|
 Members
 New dipa
 New Today 3
 Yesterday 3
 Total 64294
 Who Is On Site
 Visitors 123
 Members 0
 Total 123
Vonage VoIP Forum Members:
Login Here
Not a Member? You can Register Here
As a registered member you will have access to the VoIP Speed Test, Vonage Service Announcements and post comments in the
Vonage VoIP Forums | | | |
| Vonage Stock Price |
|
Value: 1.70
Change:  -0.03
Up to 15 Minute Delay | | | |
| Site Search |
| | |
|
|
Vonage VoIP Phone Service is redefining communications by offering consumers
& small business VoIP Internet phones, an affordable alternative to traditional phone service.
The Vonage VoIP Forum Generated This Page In: 0.44 Seconds and 319 Pages In The Last 60 Seconds
The Vonage VoIP Forum
|
