 |
 | Vonage Forum Menu |
| | |
| Vonage Forums |
|
|
| | | |
| Vonage In The News |
| | |
| Vonage Customer Reviews |
| | |
| |
Vonage The red blinking power LED means there is a problem with the voice module. You also
The red blinking power LED means there is a problem with the voice module. You also said you set up a static IP on the VT2142. If you did this on the WAN / Internet settings, you will never be able to connect to anything since you set up a non routable private IP address. This setting should either be DHCP so that the VT2142 can obtain an IP fro your internet service provider or set to a static public IP if that is what your provider uses. It is possible that the voice module got surged when the power went out and came back up and could be damaged.
Here is a list of what the LED's mean.
Power Single (1) Blink – Green During normal startup procedure, voice gateway powered on
Power Double (2) Blinks – Green VT2142 is obtaining an IP address
Power Triple (3) Blinks - Green VT2142 is obtaining configuration from Vonage
Power Four (4) Blinks - Green VT2142 is registering with Vonage
Power On - Green Voice Gateway powered on (plugged in), successfully registered. If a firmware upgrade was needed, it has been successfully completed.
Power
Blinking or On - RED
Problem with the voice gateway. Restart device (Login to device > Select "Tools" at top > Select "Restart on left" > Click "Restart") View Emulator
Power, Phone 1-2 Blinking rapidly in unison Downloading a firmware upgrade. Do NOT unplug or disconnect while downloading firmware.
Power
Phone 1-2 Solid Phone for that line is on hook, registered with Vonage and ready for use
Phone 1-2 3 Blinks - Red
(blink, blink, blink, pause, repeat) A live PSTN phone line is plugged into one of the phone ports. Note: The line must be removed and the device rebooted for the port to operate.
Phone 1-2 Blinking – Green Phone for that line is ringing or off hook
Phone 1-2 Blinking – Orange Voicemail waiting on that line
Phone 1-2 Off Phone line is not registered for service. You cannot use it for calls.
Internet On – Green Internet connection speed 100Base-T
Internet On – Yellow Internet connection speed 10Base-T
Internet Blinking Activity on the Internet connection
Ethernet On – Green Ethernet connection speed 100Base-T
Ethernet On – Yellow Ethernet connection speed 10Base-T
Ethernet
Blinking Activity on the Ethernet connection
Read The Full Thread: VT2142 Power Light is Red - Blinks Rapidly - Can''t Connect
• Hello,
I've had my Vonage for about 2 years using the same hardware.
I
• OK, After searching through the forums I tried several thing.
I disconnected
• Please remember that my RED light is no longer coming on.
I will go back into
• After you have power cycled the network, log into the VDV21, click on Status(located
• I did a "restore to default settings" ... then went back in and hit "restart". Power
• Can you copy and paste your IP information from the VT2142 status window and then
• I did the restore to default > restart > power cycle...
Power light
• Earlier, when I did the same thing...
The red light came on and it showed this...
• So in the first post, the VT2142 did not even obtain an IP from your internet service
VonTechMgr posted "The red blinking power LED means there is a problem with the voice module. You also" on 11/10/2008 |
|
|
| |
| Vonage Service Plans |
| | |
| Vonage VoIP Members |
| | |
| Vonage Stock Price |
|
Value: 3.07
Change:  +0.15
Up to 15 Minute Delay | | | |
| Site Search |
| | |
|
|
Vonage VoIP Phone Service is redefining communications by offering consumers
& small business VoIP Internet phones, an affordable alternative to traditional phone service.
The Vonage VoIP Forum Generated This Page In: 0.35 Seconds and 542 Pages In The Last 60 Seconds
The Vonage VoIP Forum
|
Members
New 
New Today 24
Yesterday 12
Total 63434
Who Is On Site
Visitors 152
Members 2
Total 154