 |
 | Vonage Forum Menu |
| | |
| Vonage Forums |
|
|
| | | |
| Vonage In The News |
| | |
| Vonage Customer Reviews |
| | |
| |
Vonage I had a tech respond by saying:
I understand your Vonage router often locks
I had a tech respond by saying:
I understand your Vonage router often locks up due to which you often lose your
phone service and internet service and so you are considered about the firmware
version.
My sincere apologies for the time you have spent dealing with this issue and I
thank you for all the additional information provided by you.
Please do the software reset of Linksys WRTP54G, by following the steps given
below:
1. Disconnect the telephone from Linksys WRTP54G and connect a computer to one
of the Ethernet ports.
2. Open a Internet Explorer and in the address bar type in the following and hit
enter:
"http://192.168.15.1"
When it prompts to enter the Username and Password, type "admin" in both
Username and Password fields and then click on "Log In".
3. Once you get the Login page, click on Administration and then click on
"Factory Defaults" below Administration.
4. Select the option "Restore Router Factory Defaults" to "YES" and click on
"Save Settings".
5. It will again ask for the Username and Password.
Username: user
Password: tivonpw
This should result "Settings are successful or Settings are Failed".
If the Settings are successful, please connect the phone to the phone port 1 of
Linksys WRTP54G and check for the dial tone.
6. If it says "Settings are Failed" try repeating the above steps, two more
times.
If it still shows "Settings Failed", please reply to this email so that I will
be able to assist you further.
I didnt even get as far as settings pass or fail cause the username and pass are wrong.
Read The Full Thread: WRTP54G stuck on 1.00.20 firmware-Won''t Update
• I tried to do my due diligence and search for the answer to this but so far I've found
• If disabling the wireless feature on the WRTP54G does NOT allow the device to auto
• I think I edited my post right when you were posting the response to me. What do I
• Argh, now I'm on the line and the agent is insisting that 1.00.20 is the most up-to-date
• I agree, that sounds and smells like BS. If your firmware version is still showing
• In an interesting turn of events, while I was holding to speak with the second level
• Version 5.01.04 is the most current firmwware for the WRTP54G. Test it for awhile
• Will do. I forget which post I saw, but I remember somebody complaining about it.
• You're correct...some users did have issues with firmware version 5.01.04 while
• This sounds like my story. They are tellin me that 1.00.18 is the most current.
plumpkatt1 posted "I had a tech respond by saying:
I understand your Vonage router often locks" on 12/19/2007 |
|
|
| |
| Vonage Service Plans |
| | |
| Vonage VoIP Members |
| | |
| Vonage Stock Price |
|
Value: 1.70
Change:  -0.03
Up to 15 Minute Delay | | | |
| Site Search |
| | |
|
|
Vonage VoIP Phone Service is redefining communications by offering consumers
& small business VoIP Internet phones, an affordable alternative to traditional phone service.
The Vonage VoIP Forum Generated This Page In: 0.37 Seconds and 319 Pages In The Last 60 Seconds
The Vonage VoIP Forum
|
Members
New 
New Today 0
Yesterday 4
Total 64288
Who Is On Site
Visitors 158
Members 0
Total 158