 |
 | Vonage Forum Menu |
| | |
| Vonage Forums |
|
|
| | | |
| Vonage In The News |
| | |
| Vonage User Reviews |
| | |
| |
Vonage Help!
I recently attempted to reconnect up my Series 1 Sony SVR-2000 after
Help!
I recently attempted to reconnect up my Series 1 Sony SVR-2000 after disconnecting it when my land line went dead. I had not wanted to pay SBC to hunt for a problem in someone else's basement (the POTS line comes into my townhouse through two others) so I discontinued land line service. I recently learned the recommended setup - forcing the modem to a slower speed - to use my TiVo with Vonage, so I attempted to reconnect it. This was unsuccessful.
When I turned on the TV after connecting the TiVo it went into the guided set up. I configured the phone setup with the ',#034' sequence in the appropriate box but my TiVo doesn't recognize the Vonage connection as a phone line. I re-tried several times with different configurations - enabling the line detection, the dial tone detection, etc. All results were the same: a failure to connect. The only variable was the length of time the failures took to occur. I even went through this same process using the ',#019' sequence, with the same results.
The phone line my TiVo is connected to is a 50' cable home run to the ATA. I tested it by connecting my cordless phone base unit to it and had dial tone, etc. Since I have Vonage fax service, I even tried using the 2nd port on the ATA as I've never had problems sending faxes from the 56k modem in my iMac. Still, no success!
One odd thing I did note: While the TiVo is connected to the ATA, the function button on the ATA remains lit. My phone doesn't show an 'Extension in use' message however and I can make a call; the function light just remains lit all the time.
Several people have stated they were able to use their Series 1 with the Vonage service and ATA. What settings were used for line and dial tone detection? Were they able to make the initial set-up call over Vonage?
I would appreciate any suggestions people have to resolve this with a minimal investment in added equipment.
Thanks.
Read The Full Thread: Vonage and TiVo - the final word
• So I've been looking through all sorts of info on series 2 TiVo units (specifically
• I'm not for sure I understand what the heck you're trying to say.. i've used a modem
• technically the vongae lines dont work well for dialup connection/ modem connections
• I believe there are ways to connect Tivo to your LAN. You may want to look into that
• WEll, after reading every article i came could dig up on vonage
and tivo.. my
• I had my series 1 working properly for about 8 months and it just stopped working
• I received Vonage a few days ago and have thrown in the towel. I can't get my series
• With regard to the TiVo Series 2 dialing out via 'analog' over your Vonage line,
• I work for a VoIP company that has a product similar to Vonage's. The problem is
• Could you please confirm that the Directv portion of the calls are going over the
Anonymous posted "Help!
I recently attempted to reconnect up my Series 1 Sony SVR-2000 after" on 09/15/2003 |
|
|
| |
| Vonage Service Plans |
| | |
| Vonage VoIP Members |
|
 Members
 New bmccabe
 New Today 1
 Yesterday 11
 Total 55108
 Who Is On Site
 Visitors 256
 Members 1
 Total 257
Vonage VoIP Forum Members:
Login Here
Not a Member? You can Register Here
As a registered member you will have access to the VoIP Speed Test, Vonage Service Announcements and post comments in the
Vonage VoIP Forums | | | |
| Vonage Stock Price |
|
Value: 1.16
Change:  -0.04
Up to 15 Minute Delay | | | |
| Site Search |
| | |
|
|
Vonage VoIP Phone Service is redefining communications by offering consumers
& small business VoIP Internet phones, an affordable alternative to traditional phone service.
The Vonage VoIP Forum Generated This Page In: 0.32 Seconds and 256 Pages In The Last 60 Seconds
The Vonage VoIP Forum
|
