 |
 | Vonage Forum Menu |
| | |
| Vonage Forums |
|
|
| | | |
| Vonage In The News |
| | |
| Vonage Customer Reviews |
| | |
| |
Vonage From Windows Help
To start the computer in safe mode
You should print these
From Windows Help
To start the computer in safe mode
You should print these instructions before continuing. They will not be available after you shut your computer down in step 2.
Click Start, click Shut Down, and then, in the drop-down list, click Shut down.
In the Shut Down Windows dialog box, click Restart, and then click OK.
When you see the message Please select the operating system to start, press F8.
Use the arrow keys to highlight the appropriate safe mode option, and then press ENTER.
If you have a dual-boot or multiple-boot system, choose the installation that you need to access using the arrow keys, and then press ENTER.
Notes
In safe mode, you have access to only basic files and drivers (mouse, monitor, keyboard, mass storage, base video, default system services, and no network connections). You can choose the Safe Mode with Networking option, which loads all of the above files and drivers and the essential services and drivers to start networking, or you can choose the Safe Mode with Command Prompt option, which is exactly the same as safe mode except that a command prompt is started instead of the graphical user interface. You can also choose Last Known Good Configuration, which starts your computer using the registry information that was saved at the last shutdown.
Safe mode helps you diagnose problems. If a symptom does not reappear when you start in safe mode, you can eliminate the default settings and minimum device drivers as possible causes. If a newly added device or a changed driver is causing problems, you can use safe mode to remove the device or reverse the change.
There are circumstances where safe mode will not be able to help you, such as when Windows system files that are required to start the system are corrupted or damaged. In this case, the Recovery Console may help you.
NUM LOCK must be off before the arrow keys on the numeric keypad will function.
Read The Full Thread: Booting WinXP computers causes Vonage TA to crash
• I have Qwest DSL with an Actiontec modem and the Motorola VT1005 adapter. They
• It sounds like you are remembering "Step-By-Step Confirmation" from Windows
• Thanks navydavy, I have used the safe mode but it was the "Step-By-Step Confirmation"
• BS, I just tried it. Hit F8 at boot up and it does the exact same thing as 95 and 98.
• I had this trouble as well bt with a PAP2 adapter. Try doing this it worked for me.....DSL
• Not sure what you did at home, but Windows XP absolutely does not offer the "Step
• Router? You mean my switch? Remember my configuration is:
-> DSL modem
• Hooray!! I think it is working properly.
I got tired of doing a power reset
• BS, I just tried it. Hit F8 at boot up and it does the exact same thing as 95 and 98.
navydavy2001 posted "From Windows Help
To start the computer in safe mode
You should print these" on 09/13/2006 |
|
|
| |
| Vonage Service Plans |
| | |
| Vonage VoIP Members |
|
 Members
 New JODI
 New Today 3
 Yesterday 5
 Total 64287
 Who Is On Site
 Visitors 150
 Members 0
 Total 150
Vonage VoIP Forum Members:
Login Here
Not a Member? You can Register Here
As a registered member you will have access to the VoIP Speed Test, Vonage Service Announcements and post comments in the
Vonage VoIP Forums | | | |
| Vonage Stock Price |
|
Value: 1.70
Change:  -0.03
Up to 15 Minute Delay | | | |
| Site Search |
| | |
|
|
Vonage VoIP Phone Service is redefining communications by offering consumers
& small business VoIP Internet phones, an affordable alternative to traditional phone service.
The Vonage VoIP Forum Generated This Page In: 0.44 Seconds and 266 Pages In The Last 60 Seconds
The Vonage VoIP Forum
|
