 |
 | Vonage Forum Menu |
| | |
| Vonage Forums |
|
|
| | | |
| Vonage In The News |
| | |
| Vonage Customer Reviews |
| | |
| |
Vonage Directly connected to my Linksys cable modem is my wireless Linksys router (BEFW11S4).
Directly connected to my Linksys cable modem is my wireless Linksys router (BEFW11S4). I have setup my Vonage router (RT31P2) behind this one.
My phone is working perfect. I can send and receive calls just fine. However, I cannot access the Vonage router admin panel. I know the default IP for the router is set to 192.168.15.1.
My wireless router looks like it is assigning the Vonage router a regular IP on my network (e.g. 192.168.1.100). The wireless router has a setting called Static Routing which is used to setup routers that are behind itself.
This setting asks for the following fields:
1) Destination IP Address - Enter the network address of the remote local LAN segment. For a standard Class C IP domain, the network address is the first three fields of the Destination LAN IP, while the last field should be zero.
2) Subnet Mask - Enter the Subnet Mask used on the destination IP domain. For a standard class C IP domain, the Subnet Mask is 255.255.255.0.
3) Gateway - If this Router is used to connect your network to the Internet, then your Gateway IP is the Router's IP Address. If you have another router handling your network's Internet connection, enter the IP Address of that router instead.
4) Hop Count - Enter the Hop Count. This is the number of hops to each node until the destination has been reached.
5) Interface - The Interface is the destination of the connection. For example, if you are from the local connection and you need to go out to the Internet port, then you interface is Internet.
I entered the following settings:
1) 192.168.15.1 which is the default IP of my Vonage router.
2) 255.255.254.0 which is the subnet mask of my wireless router. I also tried the standard 255.255.255.0.
3) 192.168.1.1 which is the IP of my wireless router.
4) I am confused about this one. I have tried 0, 1, and 2.
5) I chose Local. The other option is Internet.
I need help with setting the above setting correctly. I also need to know if there are anyother settings I need to set to gain access to my Vonage router admin panel.
I would be forever grateful for any help offered!
Read The Full Thread: Help setting up RT31P2 behind wireless Linksys Router
• I also have an option to turn on Dynamic Routing :
Used to automatically adjust
• I found this thread which explains that you can access the Vonage router via remote
• Put the Vonage/TA router infront (behind modem) of your router.
• I had the Vonage router in front for around a year now. I was experiencing dropped
• You need to either
a) Plug your LAN cable in to the Vonage router to access it
• Everything butterman said.
Is there a reason you don't want to use remote
• No, I was just making sure that was the correct way to do it. I will set it up now!
• The only other thing I would add is that it's not necessary to set up a static IP address
LilMalice posted "Directly connected to my Linksys cable modem is my wireless Linksys router (BEFW11S4)." on 05/16/2006 |
|
|
| |
| Vonage Service Plans |
| | |
| Vonage VoIP Members |
|
 Members
 New JODI
 New Today 3
 Yesterday 5
 Total 64287
 Who Is On Site
 Visitors 154
 Members 3
 Total 157
Vonage VoIP Forum Members:
Login Here
Not a Member? You can Register Here
As a registered member you will have access to the VoIP Speed Test, Vonage Service Announcements and post comments in the
Vonage VoIP Forums | | | |
| Vonage Stock Price |
|
Value: 1.70
Change:  -0.03
Up to 15 Minute Delay | | | |
| Site Search |
| | |
|
|
Vonage VoIP Phone Service is redefining communications by offering consumers
& small business VoIP Internet phones, an affordable alternative to traditional phone service.
The Vonage VoIP Forum Generated This Page In: 0.35 Seconds and 298 Pages In The Last 60 Seconds
The Vonage VoIP Forum
|
