 |
 | Vonage Forum Menu |
| | |
| Vonage Forums |
|
|
| | | |
| Vonage In The News |
| | |
| Vonage Customer Reviews |
| | |
| |
Vonage Chary:
Sounds like you need to disconnect the RGBY from one of the bridges
Chary:
Sounds like you need to disconnect the RGBY from one of the bridges and attach them, along with the wires already attached, to the other bridge. If you tie all of your internal (RGBY) wiring to the same posts (on the bridge), you should get signal across your entire phone network.
I'd bet, if you were to open the other side of the NID (not recommended), you'd find the telco's incoming wire jumpered to both RJ-11s. Thus, your house is wired for two lines (one line for the 3 jacks, the other line for the remaining jacks), but somehow they've worked around and tied one phone line to both circuits. I had to move the RGBY in my house, which was originally wired for three lines, to get all the jacks to work on my single SBC line.
BTW - we've all seen (and most have posted) advice to lock the customer side of the NID using the hasp provided. Did you know that, when the telco opens the box using the screw on the far right-hand side, the ENTIRE box front opens, exposing the customer side and the telco side? Thus, by locking the box, you're not really locking out anyone with the correct size socket...
There's even a set of instructions inside the box on how to remove your padlock from inside the telco side of the box, using a different socket.
Read The Full Thread: problem with existing phone wiring system
• Hi,
I disconnected my home wirining system at the demark. But out of 7 phone
• Yes, all the jacks worked before (with Bellsouth phone service). I physically
• Hi,
I did some more testing and have more information. may be you can help me
• Thanks for your help. That's exactly what I thought I needed to do to bridge the
• Sorry... but I think I sort of understood this conversation, and I just want to
• plyons,
Yes, you are right. That's exactly what you and I need to do. As I understand,
dg posted "Chary:
Sounds like you need to disconnect the RGBY from one of the bridges" on 03/10/2004 |
|
|
| |
| Vonage Service Plans |
| | |
| Vonage VoIP Members |
| | |
| Vonage Stock Price |
|
Value: 1.73
Change:  0.00
Up to 15 Minute Delay | | | |
| Site Search |
| | |
|
|
Vonage VoIP Phone Service is redefining communications by offering consumers
& small business VoIP Internet phones, an affordable alternative to traditional phone service.
The Vonage VoIP Forum Generated This Page In: 0.60 Seconds and 206 Pages In The Last 60 Seconds
The Vonage VoIP Forum
|
Members
New 
New Today 1
Yesterday 5
Total 64285
Who Is On Site
Visitors 110
Members 0
Total 110